The 7760AVM2 series of video and audio monitoring cards perform a number of quality control and monitoring functions associated with a modern high definition and standard definition serial digital television facility. They perform audio and ancillary data (for HD) or vertical blanking interval (VBI) data (for SDI) demultiplexing from the incoming digital video, analyze the data and display key information about the data on the output video. The outputs are digital video with analog or digital audio.
The 7760AVM2 series modules can be ordered with a 7760AVM-BHP Bulkhead Breakout Panel. This panel is an accessory that provides a convenient way of connecting the audio and GPIO signals into the high-density DB-15 connectors on the rear of the modules. This panel is available for five or ten 7760AVM2's and includes 3 ft. cables to connect to the 7760AVM2 modules.
The 7760AVM2 series modules occupy one card slot and can be housed in the 1RU 7801FR frame which holds up to four single or two dual slot modules, the 3RU 7800FR frame which has a 15 slot capacity, the portable 3RU 350FR frame which has a 7 slot capacity, or a standalone enclosure which holds a single module.
VistaLINK® enables control and configuration capabilities via Simple Network Management Protocol (SNMP). This offers the flexibility to manage the module status monitoring and configuration from SNMP enabled control systems such as Evertz VistaLINK® Pro locally or remotely.
Serial Video Digital Input | |
---|---|
Standards | Auto detect or menu selectable SMPTE ST 259-C (270 Mb/s): 525i/59.94 or 625i/50 SMPTE ST 292-1 (1.5Gb/s): 1080i/60, 1080i/59.94, 1080i/50, 720p/60, 720p/59.94 and 720p/50 |
Number of Inputs | 1 |
Connector | BNC per IEC 61169-8 Annex A |
Input Equalization | Automatic to 200m @ 270Mb/s with Belden 8281 or equivalent cable Automatic to 115m @ 1.5Gb/s with Belden 1694A or equivalent cable |
Return Loss | |
SD Standards | > 15dB up to 270Mb/s |
HD Standards | > 15dB up to 1.5Gb/s |
Serial Video Digital Output | |
---|---|
Standard | Same as input |
Number of Outputs | 1 Reclocked, 1 Monitored |
Connector | BNC per IEC 61169-8 Annex A |
Signal Level | 800mV nominal |
DC Offset | 0V ±0.5V |
Rise and Fall Time | |
SD Standards | 470ps nominal |
HD Standards | 200ps nominal |
Overshoot | < 10% of amplitude |
Analog Audio Outputs | |
---|---|
Notes | NOTE: High impedance loads only (10kΩ). Not good for low impedance loads (i.e. 600Ω) |
Number of Outputs | 4 |
---|---|
Type | Balanced Analog Audio |
Connectors | Female High Density DB-15 |
Output Impedance | 33Ω |
Sampling Frequency | 48kHz |
Signal Level | 0dB FS => 8 to 24dBu (user settable) |
Frequency Response | 50Hz to 20kHz: ±0.20dB |
SNR | > 85dB (50Hz to 20kHz) |
THD+N | 65dB @ 1kHz, 0dB FS, typical |
AES Audio Outputs | |
---|---|
Number of Outputs | 2 |
Standard | SMPTE ST 276 compatible, single ended synchronous or asynchronous AES |
Connectors | High-density female DB-15 |
Resolution | 24 bits |
Sampling Rate | 48kHz |
Impedance | 75Ω unbalanced |
Audio Bar Graphs | |
---|---|
Number of Graphs | 4 (1 group) |
Ballistics | AES/EBU, DIN, BBC and Nordic N9 |
General Purpose Interface I/O (GPI/GPO) | |
---|---|
Number of Inputs | 2 (behavior is assigned via On screen menu items) |
Number of Outputs | 1 (behavior is programmable via On screen menu items) |
Type | Opto-isolated, active low with internal pull-ups to +5V |
Connector | Female High Density DB-15 |
Signal Level | +5V nominal |
Data Logging Serial Port | |
---|---|
Standard | RS-232 |
Connector | Female High Density DB-15 |
Baud Rate | 57600 |
Format | 8-bits, no parity, 2 stop bits and no flow control |
Physical | |
---|---|
Number of slots | 1 |
Electrical | |
---|---|
Voltage | +12VDC |
Power | 12 Watts |
EMI/RFI | Complies with FCC Part 15, Class A, EU EMC Directive |
7760AVM2-HD | HD Video & Audio Monitoring |
---|
Ordering Options | |
---|---|
Notes | • Rear plate must be specified at time of order - eg: [model]+3RU |
+SID | Source ID Decoder |
---|
Rear Plate Suffix | |
---|---|
+1RU | 1RU rear plate for use with 7701FR Multiframe |
+SA | Standalone Enclosure Rear Plate |
+3RU | 3RU rear plate for use with 350FR, 7700FR-C, 7800FR or 7801FR Multiframes |
Enclosures | |
---|---|
350FR | Portable Multiframe which holds 7 single slot modules |
7700FR-C | 3RU Multiframe which holds 15 single slot modules |
7800FR | 3RU Multiframe which holds 15 single slot modules |
7801FR | 1RU Multiframe which holds 4 single slot modules |
7701FR | 1RU Multiframe which holds 3 single slot modules |
S7701FR | 7700 Series Standalone Enclosure |
Accessories | |
---|---|
7800FC | VistaLINK® Frame Controller |
CP-2116E | System Control Panel, One Touchscreen LCD and 16 LCD Buttons |
CP-2232E | System Control Panel, 2RU, Two Touchscreen LCDs and 32 LCD Buttons |
7760AVM-BHP-5 | Bulkhead Breakout panel for 5 AVM's includes 5 WPAVMIO-1-0-3F 3' cables |
7760AVM-BHP-10 | Bulkhead Breakout panel for 10 AVM's includes 10 WPAVMIO-1-0-3F 3' cables |