The 7801FC VistaLINK® Frame Controller card provides a single point of access to communicate with VistaLINK®-capable modules. The 7801FC VistaLINK® Frame Controller provides a 10Base-T/100Base-TX/1000 Base-TX Ethernet port, and communication is facilitated through the use of Simple Network Management Protocol (SNMP).
The 7801FC VistaLINK® Frame Controller handles all SNMP communications between the frame (7801FR) and the network manager (NMS), and serves as a gateway to individual cards in the frame.
Features
- Complies with IEEE 802.3 10BASE-T, 100BASE-TX and 1000BASE-TX Ethernet standards
- 1000MB/s Gigabit Ethernet, 100MB/s Fast Ethernet or 10MB/s Ethernet data transfer, selected by auto negotiation
- Full-duplex or half-duplex operation, selected by auto-negotiation
- RJ-45 connector for network cable connection
- Card edge LEDs indicate module fault, microprocessor state, activity and link status
- Rear panel LEDs indicate Ethernet link, activity and speed
- Supports "ftp" upgrades for frame-wide firmware upgrades (product specific)
- Includes VistaLINK® PRO (VLPRO-C) module software configuration tool
- Provides frame/chassis status information through VistaLINK® including power supply status, frame status, card insertion/removal counters, 7801FC software version number and LED control
- Provides an onboard web interface to directly control modules that support WebEASY
Specifications
Ethernet | |
|---|---|
| Network Type | IEEE 802.3 (10BASE-T) IEEE 802.3u (100BASE-TX) IEEE 802.3ab (1000BASE-TX) |
| Connector | RJ-45 |
Electrical | |
|---|---|
| Voltage | +12V DC |
| Power | 8 watts |
| EMI/RFI | Complies with FCC Part 15, Class A EU EMC directive |
Physical | |
|---|---|
| Number of Slots | 0 (User dedicated slot) |
Ordering Information
| 7801FC | VistaLINK® Frame Controller Enclosure |
|---|
Enclosure | |
|---|---|
| 7801FR | 1RU Multiframe which holds up to 4 single slot modules |