Interact with this product in a Layout Tool:
The 7707OO-2-OC and 7707OO-2L-OC are VistaLINK® enabled, optical to optical wavelength shifter/regenerator for telecom and datacom signals. Monitoring and control of card status and parameters is provided locally at the card edge and remotely via VistaLINK®.
The 7707OO-2-OC and 7707OO-2L-OC accepts two fiber inputs and provides two optical outputs. All versions accept 1270nm to 1610nm optical input signals on multi-mode or single-mode fiber. The 7707OO-2-OC and 7707OO-2L-OC are available in 1310nm, 1550nm, CWDM and DWDM configurations.
Features
- Reclocking and indication for OC-3/STM-1, OC-12/STM-4 and OC-48/STM-16 and a number of other telecom and datacom rates (see specifications)
- Non-reclocking mode for support of additional signal rates (125Mb/s-3.187Gb/s)
- Full-Duplex
- Wide range optical input (1270nm-1610nm)
- 1310nm, 1550nm and CWDM wavelengths available for optical outputs
- DWDM wavelengths (ITU-T G.694.1 compliant) also available for fiber link connection
- Comprehensive signal and card status monitoring via four digit card edge display or remotely through SNMP and VistaLINK®
- Detection and display of optical input power and data rate
- Fully hot-swappable from front of frame
- VistaLINK® capable for remote monitoring via SNMP (using VistaLINK® PRO) when installed in 7800FR frame with a 7800FC VistaLINK® Frame Controller
Optical Input Standards (reclocked)
Datacom
| Standard | Data Rate |
|---|---|
| Fiber Channel | 2.125Gb/s |
| Fiber Channel | 1.062Gb/s |
| Fiber Channel | 531Mb/s |
| Fiber Channel | 266Mb/s |
| Fiber Channel | 133Mb/s |
| Fast Ethernet | 125Mb/s |
| XAUI | 3.125Gb/s |
| XAUI | 3.187Gb/s |
| ESCON | 200Mb/s |
Telecom
| Standard | Data Rate |
|---|---|
| OC48/STM16 | 2.488Gb/s |
| OC12/STM4 | 622Mb/s |
| OC3/STM1 | 155Mb/s |
| Gigabit Ethernet | 1.25Gb/s |
Specifications
Optical Inputs | |
|---|---|
| Rates (non-reclocked) | 125Mb/s-3.187Gb/s |
| Connector | Female SC/PC, SC/APC |
| Wavelength | 1270nm -1610nm |
| Optical Sensitivity | |
| Standard & Equipment Side | -22dBm |
| High Sensitivity (-H) | -29dBm |
| Max. Input Power | |
| Standard & Equipment Side | -1dBm |
| High Sensitivity (-H) | -7dBm |
| Fiber Size | 62µm core / 125µm overall |
Optical Outputs | |
|---|---|
| Standards | same as optical input |
| Number of Outputs | 2 |
| Connector | SC/PC, SC/APC female housing |
| Return Loss | < 14dB |
| Fiber Size | 9µm core / 125µm overall |
| Equipment Side | |
| Wavelengths Standard | 1310nm |
| Output Power 1310nm FP | -7dBm ± 1dBm |
| Line Side Wavelengths | |
| Standard | 1310nm, 1550nm (nominal) |
| CWDM | 1270nm to 1610nm (See ordering information) |
| DWDM | C-Band/L-Band (ITU-T G.694.1 compliant) |
| Output Power | |
| 1310nm FP | -7dBm ± 1dBm |
| 1550nm & CWDM | 0dBm ± 1dBm |
| DWDM | +7dBm ± 1dBm |
Electrical | |
|---|---|
| Voltage | +12V DC |
| Power | 6 Watts (9 Watts DWDM) |
Physical | |
|---|---|
| Number of slots | 1 |
Compliance | |
|---|---|
| Laser Safety | Class 1 laser product, complies with 24CFR 1040.10 and 1040.11, IEC 60825-1 |
| EMI/RFI | Complies with FCC regulations for class A devices Complies with EU EMC directive |
Ordering Information
| Optical to Optical Wavelength Shifter/Regenerator | |
|---|---|
| 7707OO13‑2‑OC | 1310nm FP laser and standard receiver (line side), VistaLINK® |
| 7707OO15‑2‑OC | 1510nm DFB laser and standard receiver (line side), VistaLINK® |
| 7707OO15‑2L‑OC | 1510nm DFB laser, dual line, VistaLINK® |
| CWDM (Ordering Information) | |
|---|---|
| 7707OOxx‑2‑OC | CWDM DFB laser and standard receiver (line side), VistaLINK® |
| 7707OOxx/yy‑2L‑OC | CWDM DFB laser, dual line, standard receiver, VistaLINK® |
| 7707OOxx‑2‑OC‑H | CWDM DFB laser and high sensitivity receiver (line side), VistaLINK® |
| 7707OOxx/yy‑2L‑OC‑H | CWDM DFB laser, dual line, high sensitivity receiver, VistaLINK® |
| DWDM (Ordering Information) | |
|---|---|
| 7707OODxxx‑2‑OC | DWDM DFB laser and standard receiver (line side), VistaLINK® (Contact Factory for Wavelength Availability) |
| 7707OODxxx/Dyyy‑2L‑OC | DWDM DFB laser, dual line, standard receiver, VistaLINK® (Contact Factory for Wavelength Availability) |
| 7707OODxxx‑2‑OC‑H | DWDM DFB laser and high sensitivity receiver (line side), VistaLINK® (Contact Factory for Wavelength Availability) |
| 7707OODxxx/Dyyy‑2L‑OC‑H | DWDM DFB laser, dual line, high sensitivity receiver, VistaLINK® (Contact Factory for Wavelength Availability) |
Ordering Options | |
|---|---|
| Notes | • Rear plate and fiber connector must be specified at time of order - eg: [model]+SC+3RU |
| Connector Suffix | |
|---|---|
| +SC | SC/PC |
| +AP+SC | SC/APC (Angle Polished) |
| Rear Plate Suffix | |
|---|---|
| +1RU | 1RU rear plate for use with 7701FR Multiframe |
| +SA | Standalone Enclosure Rear Plate |
| +3RU | 3RU rear plate for use with 350FR, 7700FR-C or 7800FR Multiframes |
Enclosures | |
|---|---|
| 350FR | Portable Multiframe which holds 7 single slot modules |
| 7700FR-C | 3RU Multiframe which holds 15 single slot modules |
| 7800FR | 3RU Multiframe which holds 15 single slot modules |
| 7701FR | 1RU Multiframe which holds 3 single slot modules |
| S7701FR | 7700 Series Standalone Enclosure |