Interact with this product in a Layout Tool:
Features
- Single card fiber optic receiver for one composite analog or SDI video and four analog or AES signals
- Auto-sensing (analog or digital) video and audio outputs
- Supports both NTSC and PAL analog, or 4:2:2 component digital video
- Supports Analog to Digital and Digital to Analog audio conversion
- Broadcast quality analog video and audio performance
- Meets or exceeds EIA/TIA RS250-C short haul specifications for analog video and audio transport
- Supports 32, 44.1, 48KHz AES audio inputs
- Comprehensive signal and card status monitoring via four-digit card-edge display, or remotely through SNMP and VistaLINK®
- Dolby E™ compatible
- Auto de-embedding capability for digital video and Analog or AES Audio
- -NF version converts copper 270Mb/s link input back to video & audio
- Adjustable gain, DC offset and pre-emphasis for driving up to 250m of Belden 1694 coaxial cable
- Fully hot-swappable from front of frame with no fiber disconnect/reconnect required
- Supports single-mode and multi-mode fiber optic cable
- Input available with fiber optics or BNC (-NF version)
- Wideband optical input (1270nm - 1610nm)
- Passes embedded and/or external audio for digital video
- VistaLINK® capable for remote monitoring via SNMP (using VistaLINK® PRO) when installed in 7800FR frame with a 7800FC VistaLINK® Frame Controller
Specifications
Analog Video Output | |
---|---|
Standard | NTSC (SMPTE ST 170), PAL (ITU-R 624-2) |
Number of Outputs | 2 |
Connector | BNC per IEC 61169-8 Annex A |
System Bandwidth | > 5.5MHz |
Level | 1V p-p (nominal), 2V p-p (maximum) |
Gain | Unity gain nominal, adjustable 50% to 150% |
Impedance | 75Ω |
Return Loss | > 30dB to 5.5MHz |
SNR | > 70dB |
Differential Gain | < 1.0% |
Differential Phase | < 0.7° |
Pre-emphasis | Adjustable cable loss compensation for up to 250m of Belden 1694 |
Passband Ripple | |
NTSC | < ±0.1dB to 4.1MHz < ±0.2dB to 5.5MHz |
PAL | < ±0.1dB to 4.8MHz < ±0.2dB to 5.8MHz |
Chroma/Luma Gain | 98% to 103% |
Chroma/Luma Delay | |
NTSC | < 5ns |
PAL | < 12ns |
Line Time Distortion | 1.2% |
Serial Video Output | |
---|---|
Standard | SMPTE ST 259-C, SMPTE ST 305 (SDTi), DVB-ASI |
Number of Outputs | 2 regenerated |
Connector | BNC per IEC 61169-8 Annex A |
Equalization | Automatic to 300m with Belden 1694A (or equivalent) |
Signal Level | 800mV nominal |
DC Offset | 0V ±0.5V |
Rise/Fall Time | 900ps nominal |
Overshoot | < 10% of amplitude |
Return Loss | > 15dB at 270Mb/s |
Wideband Jitter | < 0.2UI |
Serial Input | |
---|---|
Number of Inputs | 1 |
Connector | BNC per IEC 61169-8 Annex A |
Signal Level | 800mV nominal |
DC Offset | 0V ±0.5V |
Rise & Fall Time | 900ps nominal |
Overshoot | < 10% of amplitude |
Return Loss | > 15dB at 270Mb/s |
Wideband Jitter | < 0.2UI |
Analog Audio Output | |
---|---|
Number of Outputs | 4 |
Type | Balanced analog audio |
Connector | 12-pin removable terminal block |
Impedance | 66Ω |
Frequency Response | ±0.1dB, 20Hz to 20kHz |
THD | < 0.005%, 20Hz to 20kHz |
Channel Phase Differential | ±1° |
SNR (weighted) | > 85dB |
Output Level Adj. | -20dB to 3dB |
Maximum Level | 24dBu into 10kΩ loads |
AES Audio Output | |
---|---|
Standard | |
Balanced | AES3-1992 |
Unbalanced | SMPTE ST 276 |
Other | Dolby E™ compatible |
Number of Outputs | 4 regenerated (selectable for balanced or unbalanced) |
Connector | 12 pin removable terminal block |
Return Loss | > 15dB, 1MHz to 6MHz |
Signal Level | |
Balanced | 2V p-p ±0.1V |
Unbalanced | 1V p-p ±0.1V |
Resolution | Up to 24 bits |
Sampling Rate | 32, 44.1, 48kHz |
Jitter | < 0.1UI |
Impedance | |
Balanced | 110Ω |
Unbalanced | 75Ω |
Optical Input | |
---|---|
Number of Inputs | 1 |
Connector | Female SC/PC, FC/PC |
Wavelength | 1270nm to 1610nm |
Maximum Power | 0dBm |
Optical Sensitivity | -30dBm |
Electrical | |
---|---|
Voltage | +12V DC |
Power | 13 Watts |
EMI/RFI | Complies with FCC Part 15, Class A, EU EMC Directive |
Physical | |
---|---|
Number of Slots | 1 |
Ordering Information
7707ADVR | Analog or SDI Video with 4 Channel Analog or AES Audio Fiber Receiver |
---|---|
7707ADVR‑NF | Analog or SDI Video with 4 Channel Analog or AES Audio Electrical input only Receiver |
Ordering Options | |
---|---|
Notes | • Rear plate and fiber connector must be specified at time of order - eg: [model]+SC+3RU |
Connector Suffix | |
---|---|
+SC | SC/PC |
+FC | FC/PC |
Rear Plate Suffix | |
---|---|
+1RU | 1RU rear plate for use with 7701FR Multiframe |
+SA | Standalone Enclosure Rear Plate |
+3RU | 3RU rear plate for use with 350FR, 7700FR-C or 7800FR Multiframes |
Enclosures | |
---|---|
350FR | Portable Multiframe which holds 7 single slot modules |
7700FR-C | 3RU Multiframe which holds 15 single slot modules |
7800FR | 3RU Multiframe which holds 15 single slot modules |
7701FR | 1RU Multiframe which holds 3 single slot modules |
S7701FR | 7700 Series Standalone Enclosure |