Interact with this product in a Layout Tool:
Features
- Transports signals at the OC-48/STM-16 rate
- Single card TDM demultiplexer for eight asynchronous SDI signals
- Also supports SDTi and DVB-ASI signals
- Built-in Ethernet transceiver with one 10/100 Base-T port
- Interfaces directly to the SONET/SDH infrastructure
- Uncompressed, full-rate video transport
- Signal transport over fiber uninterrupted by loss of any input feed
- Transparently passes embedded AES or any other data in the horizontal or vertical ancillary data space
- Stratum 3 wander/holdover/jitter compliance
- Wide input frequency range tolerance (±50ppm)
- Fully hot-swappable from front of frame
- Supports single-mode and multi-mode fiber optic cable
- Optical output wavelengths of 1310nm, 1550nm, and up to sixteen CWDM wavelengths (ITU-T G.694.2 compliant)
- DWDM wavelengths (ITU-T G.694.1 compliant) also available
- SC/PC, FC/PC connector options
- Comprehensive signal and card status monitoring via four digit card edge display or remotely through SNMP and VistaLINK®
- VistaLINK® capable for remote monitoring via SNMP (using VistaLINK® PRO) when installed in 7800FR frame with a 7800FC VistaLINK® Frame Controller
- Occupies two card slots and can be housed in the 1RU 7801FR frame which holds up to four single or two dual slot modules, the 3RU 7800FR frame which has a 15 slot capacity, the portable 3RU 350FR frame which has a 7 slot capacity, or a standalone enclosure which holds a single module.
Specifications
Serial Video Output | |
---|---|
Standards | SMPTE ST 259-C, DVB-ASI, SMPTE ST 305 (SDTi) |
Number of Outputs | 8 + 1 monitor with user selectable source |
Connector | BNC per IEC 61169-8 Annex A |
Signal Level | 800mV nominal |
DC Offset | 0V ±0.5V |
Rise and Fall Time | 900ps nominal at 270Mb/s |
Overshoot | < 10% of amplitude |
Return Loss | > 12dB |
Wideband Jitter | < 0.2UI |
Serial Video Monitor Output | |
---|---|
Standards | SMPTE ST 259-C, DVB-ASI, SMPTE ST 305 (SDTi) |
Number of Outputs | 1, signal user selectable from the 8 inputs |
Connector | BNC per IEC 61169-8 Annex A |
Signal Level | 800mV nominal |
DC Offset | 0V ±0.5V |
Rise and Fall Time | 900ps nominal |
Overshoot | < 10% of amplitude |
Return Loss | > 12dB |
Wideband Jitter | < 0.2UI |
Optical Output | |
---|---|
Standards | OC-48/STM-16 |
Number of Outputs | 1 |
Connector | Female SC/PC or FC/PC |
Return Loss | > 14dB |
Wideband Jitter | < 0.2UI |
Fiber Size | 9µm core / 125µm overall |
Wavelength | |
Standard | 1310nm, 1550nm (nominal) |
CWDM | 1270nm to 1610nm (See Ordering Information) |
DWDM | C-Band (ITU-T G.694.1 compliant)(See Ordering Information) |
Power | |
1310nm FP (Standard) | -6dBm ±1dBm |
1550nm & CWDM DFB | 0dBm ±1dBm |
DWDM DFB | +7dBm ±1dBm |
Optical Input | |
---|---|
Standards | OC-48/STM-16 |
Number of Inputs | 1 |
Connector | Female SC/PC or FC/PC |
Return Loss | > 25dB |
Wavelength | 1270nm to 1610nm |
Maximum Input Power | |
Standard | -1dBm |
Optical Sensitivity | |
Standard | -23dBm |
Electrical | |
---|---|
Voltage | +12V DC |
Power | 10 Watts (non DWDM) 13 Watts (DWDM) |
Physical | |
---|---|
Number of Slots | 1 |
Compliance | |
---|---|
Laser Safety | Complies with 24 CFR 1040.10 and 1040.11 |
EMI/RFI | Complies with FCC regulations for Class A devices Complies with EU EMC directive |
Ordering Information
Eight Channel SDI + Ethernet SONET/SDH Fiber Receiver | |
---|---|
7707VR13‑8‑OC48 | 1310nm FP laser, VistaLINK® |
7707VR15‑8‑OC48 | 1550nm DFB laser, VistaLINK® |
7707VR15‑8‑OC48‑H | 1550nm DFB laser, high sensitivity receiver, VistaLINK® |
CWDM (Ordering Information) | |
---|---|
7707VRxx‑8‑OC48 | CWDM DFB laser, VistaLINK® |
7707VRxx‑8‑OC48‑H | CWDM DFB laser, high sensitivity receiver, VistaLINK® |
DWDM (Ordering Information) | |
---|---|
7707VRDxxx‑8‑OC48 | DWDM DFB laser, VistaLINK® (Contact Factory for Wavelength Availability) |
7707VRDxxx‑8‑OC48‑H | DWDM DFB laser, high sensitivity receiver, VistaLINK® (Contact Factory for Wavelength Availability) |
Ordering Options | |
---|---|
Notes | • Rear plate and fiber connector must be specified at time of order - eg: [model]+SC+3RU |
Connector Suffix | |
---|---|
+SC | SC/PC |
+FC | FC/PC |
Rear Plate Suffix | |
---|---|
+1RU | 1RU rear plate for use with 7701FR Multiframe |
+SA | Standalone Enclosure Rear Plate |
+3RU | 3RU rear plate for use with 350FR, 7700FR-C or 7800FR Multiframes |
Enclosures | |
---|---|
350FR | Portable Multiframe which holds 7 single slot modules |
7700FR-C | 3RU Multiframe which holds 15 single slot modules |
7800FR | 3RU Multiframe which holds 15 single slot modules |
7701FR | 1RU Multiframe which holds 3 single slot modules |
S7701FR | 7700 Series Standalone Enclosure |