Interact with this product in a Layout Tool:
Features
- Receives GPS data signals from two Trimble Acutime series Smart Antennas simultaneously
- Allows user to run 1 or 2 Acutime series GPS heads for primary and redundant links
- All configuration settings are controllable through the card-edge user interface, or VistaLINK®
- Comprehensive signal and status monitoring via four-digit card-edge display, or VistaLINK®
- Optical output wavelengths of 1310nm or 1550nm provides a 2km transmission distance of GPS signal data
- Low latency
- Supports with multi-mode and single-mode fiber optic cable
- SC/PC or FC/PC fiber connector options
- Fully hot swappable from front of frame
- VistaLINK® capable for remote monitoring via SNMP (using VistaLINK® PRO) when installed in 7800FR frame with a 7800FC VistaLINK® Frame Controller
Specifications
GPS Serial Data | |
|---|---|
| Number of Signals | 2 bi-directional |
| Connector | DB-9 |
| Type | RS-232 or RS-422 (selectable) |
| Bit Rate | 115kb/s |
Optical Input / Output | |
|---|---|
| Number of Connections | 2 |
| Connector | Female SC/PC or FC/PC |
| Maximum Input Power | 0dBm |
| Input Optical Sensitivity | -22dBm |
| Fiber Size and Type | |
| Tx | 9µm core / single mode |
| Rx | 62.5µm core / multi-mode |
| Output Wavelength | 1310nm, 1550nm (nominal) |
| Output Power | |
| 1310nm FP | -7dBm ±1dBm |
| 1550nm DFB | 0dBm ±1dBm |
Electrical | |
|---|---|
| Voltage | +12V DC |
| Power | 6 Watts |
GPS Power | |
|---|---|
| Voltage | +17V DC |
| Power | 17 Watts |
| Current | 200mA |
Physical | |
|---|---|
| Number of Slots | 1 |
Compliance | |
|---|---|
| Laser Safety | Class 1 laser product, complies with 24CFR 1040.10 and 1040.11, IEC 60825-1 |
| EMI/RFI | Complies with FCC Part 15, Class A, EU EMC Directive |
Ordering Information
| Dual GPS Data Fiber Receiver | |
|---|---|
| 7707GPS-DR13-F2 | 1310nm FP Tx and Rx |
| 7707GPS-DR15-F2 | 1550nm DFB Tx and Rx |
Ordering Options | |
|---|---|
| Notes | • Rear plate and fiber connector must be specified at time of order - eg: [model]+SC+3RU |
| Connector Suffix | |
|---|---|
| +SC | SC/PC |
| +FC | FC/PC |
| Rear Plate Suffix | |
|---|---|
| +1RU | 1RU rear plate for use with 7701FR Multiframe |
| +SA | Standalone Enclosure Rear Plate |
| +3RU | 3RU rear plate for use with 350FR, 7700FR-C or 7800FR Multiframes |
Enclosures | |
|---|---|
| 350FR | Portable Multiframe which holds 7 single slot modules |
| 7700FR-C | 3RU Multiframe which holds 15 single slot modules |
| 7800FR | 3RU Multiframe which holds 15 single slot modules |
| 7701FR | 1RU Multiframe which holds 3 single slot modules |
| S7701FR | 7700 Series Standalone Enclosure |
Accessories | |
|---|---|
| Notes | • The 7707GPS-DR-F2 and 7707GPS-DT-F2 are only compatible with the WA-T76 and WA-T77 cables. |
| • Please specify the quantity of WA-T76 and WA-T77 cables required to connect the 7707GPS-DR and 7707GPS-DR to the Acutime Head and 5600MSC or 5010-GPSII respectively. | |
| WA-T76 | 100' IF cable for 5600MSC, GPSII and 7707GPS-DR |
|---|---|
| WA-T10 | 200' IF cable for 5600MSC, GPSII and 7707GPS-DR |
| WA-T77 | 100' IF cable for 7707GPS-DR to 5600MSC |