The 7800IDA2Q Dual 3G/HD/SD-SDI Reclocking Distribution Amplifier provides high quality distribution of facility 3G/HD/SD-SDI signals. HD versions support SMPTE 292M and SMPTE 259M signals while 3G versions also support SMPTE 424M signals. This module features dual auto-sensing equalized inputs with unparalleled cable equalization, making it the most-cost effective and ideal solution for long cable run environments.
For maximum flexibility, the module can operate in a dual input to four outputs each configuration or as one input to eight output configuration.
The 7800IDA2Q is VistaLINK® enabled, offering remote monitoring, control and configuration capabilities via Simple Network Management Protocol (SNMP) giving the flexibility to manage operations, including signal monitoring and module configuration from SNMP capable control systems (Manager or NMS).
The 7800IDA2Q occupies 1 card slot and can be housed in the 1RU 7801FR frame which holds up to four single or two dual slot modules, the 3RU 7800FR frame which has a 15 slot capacity, or the portable 3RU 350FR frame which has a 7 slot capacity. The 7800FC frame controller is required for configuration.
Serial Video Input | |
---|---|
Standards | |
Reclocked Mode | SMPTE ST 424-1 (3Gb/s) (-3G version) SMPTE ST 292-1 (1.5Gbs) SMPTE ST 259-1 (270Mb/s) |
Non-reclocked Mode | SMPTE ST 344-1 (540Mb/s) SMPTE ST 259-1 (360Mb/s, 143Mb/s) SMPTE ST 310-1 (19.4Mb/s), DVB-ASI |
Connector | 2 BNC per IEC 61169-8 Annex A |
Equalization | Automatic to (with Belden 1694A or equivalent cable) 150m @ 3Gb/s 200m @ 1.5Gb/s 380m @ 270Mb/s |
Return Loss | > 10dB up to 3GHz, > 15dB up to 1.5GHz |
Serial Video Outputs | |
---|---|
Number of Outputs | |
2 - 1x4 Mode | 4 reclocked from each input |
1x8 Mode | 8 reclocked from first input |
Connector | Din 1.0/2.3 connector |
Signal Level | 800mV nominal |
DC Offset | 0V ± 0.5V |
Rise & Fall Time | 200ps for 3G/HD-SDI, 900ps for SD-SDI |
Overshoot | < 10% of amplitude |
Return Loss | > 15dB up to 1.5GHz, > 20dB up to 270MHz |
Wideband Jitter | < 0.2UI HD, < 0.3UI 3G |
Electrical | |
---|---|
Voltage | +12V DC |
Power | 6 watts |
EMI/RFI | Complies with FCC Part 15 Class A EU EMC Directive |
Physical | |
---|---|
Number of Slots | 1 |
Notes | • Requires 7800FC for full module control |
---|
7800IDA2Q-3G | Dual 3G/HD/SD-SDI Reclocking Distribution Amplifier |
---|---|
7800IDA2Q-HD | Dual HD/SD-SDI Reclocking Distribution Amplifier |
Ordering Options | |
---|---|
Note | • Rear plate must be specified at time of order - eg: [model]+3RU |
Rear Plate Suffix | |
---|---|
+3RU | 3RU rear plate for use with 350FR, 7700FR-C, 7800FR, 7800FR-QT or 7801FR Multiframes |
Enclosures | |
---|---|
350FR | Portable Multiframe which holds 7 single slot modules |
7700FR-C | 3RU Multiframe which holds 15 single slot modules |
7800FR | 3RU Multiframe which holds 15 single slot modules |
7800FR-QT | 3RU Quiet Multiframe which holds 15 single slot modules |
7801FR | 1RU Multiframe which holds 4 single slot modules |