Interact with this product in a Layout Tool:
Features
- Single card TDM multiplexer for eight asynchronous SDI signals
- Transports signals at the OC-48/STM-16 rate
- Also supports SDTi and DVB-ASI signals
- Built-in Ethernet transceiver with one 10/100 Base-T port
- Interfaces directly to the SONET/SDH infrastructure
- Uncompressed, full-rate video transport
- Signal transport over fiber uninterrupted by loss of any input feed
- Transparently passes embedded AES or any other data in the horizontal or vertical ancillary data space
- Stratum 3 wander/holdover/jitter compliance
- Wide input frequency range tolerance (± 50ppm)
- Fully hot-swappable from front of frame
- Supports single-mode and multi-mode fiber optic cable
- Optical output wavelengths of 1310nm, 1550nm, and up to sixteen CWDM wavelengths (ITU-T G.694.2 compliant)
- DWDM wavelengths (ITU-T G.694.1 compliant) also available
- SC/PC, FC/PC connector options
- Comprehensive signal and card status monitoring via four digit card edge display or remotely through SNMP and VistaLINK®
- VistaLINK® capable for remote monitoring via SNMP (using VistaLINK® PRO) when installed in 7800FR frame with a 7800FC VistaLINK® Frame Controller
- Occupies two card slots and can be housed in the 3RU 7800FR frame which has a 15 slot capacity, or the portable 3RU 350FR frame which has a 7 slot capacity.
Specifications
Serial Video Input | |
|---|---|
| Standards | SMPTE ST 259-C, DVB-ASI, SMPTE ST 305 (SDTi) |
| Number of Inputs | 8 |
| Connector | BNC per IEC 61169-8 Annex A |
| Equalization | Automatic to 250m @ 270Mb/s with Belden 1694 or equivalent cable |
| Return Loss | > 15dB up to 1.5Gb/s |
| Frequency Offset Tolerance | ± 50ppm |
Serial Video Monitor Output | |
|---|---|
| Standards | SMPTE ST 259-C, DVB-ASI, SMPTE ST 305 (SDTi) |
| Number of Outputs | 1, signal user selectable from the 8 inputs |
| Connector | BNC per IEC 61169-8 Annex A |
| Signal Level | 800mV nominal |
| DC Offset | 0V ±0.5V |
| Rise and Fall Time | 900ps nominal |
| Overshoot | < 10% of amplitude |
| Return Loss | > 12dB |
| Wideband Jitter | < 0.2UI |
Optical Output | |
|---|---|
| Standards | OC-48/STM-16 |
| Number of Outputs | 1 |
| Connector | Female SC/PC or FC/PC |
| Return Loss | > 14dB |
| Wideband Jitter | < 0.2UI |
| Fiber Size | 9µm core / 125µm overall |
| Wavelength | |
| Standard | 1310nm, 1550nm (nominal) |
| CWDM | 1270nm to 1610nm (See Ordering Information) |
| DWDM | C-Band (ITU-T G.694.1 compliant)(See Ordering Information) |
| Power | |
| 1310nm FP (Standard) | -6dBm ±1dBm |
| 1550nm & CWDM DFB | 0dBm ±1dBm |
| DWDM DFB | +7dBm ±1dBm |
Optical Input | |
|---|---|
| Number of Inputs | 1 |
| Standards | OC-48/STM-16 |
| Connector | Female SC/PC or FC/PC |
| Return Loss | > 25dB |
| Wavelength | 1270nm to 1610nm |
| Maximum Input Power | |
| Standard | -1dBm |
| Optical Sensitivity | |
| Standard | -21dBm |
Electrical | |
|---|---|
| Voltage | +12V DC |
| Power | 10 Watts (non DWDM) 13 Watts (DWDM) |
Physical | |
|---|---|
| Number of Slots | 2 |
Compliance | |
|---|---|
| Laser Safety | Complies with 24 CFR 1040.10 and 1040.11 |
| EMI/RFI | Complies with FCC regulations for Class A devices Complies with EU EMC directive |
Ordering Information
| Eight Channel SDI + Ethernet SONET/SDH Fiber Transmitter | |
|---|---|
| 7707VT13-8-OC48 | 1310nm FP laser, VistaLINK® |
| 7707VT15-8-OC48 | 1550nm DFB laser, VistaLINK® |
| 7707VT15-8-OC48-H | 1550nm DFB laser, high sensitivity receiver, VistaLINK® |
| CWDM (Ordering Information) | |
|---|---|
| 7707VTxx-8-OC48 | CWDM DFB laser, VistaLINK® |
| 7707VTxx-8-OC48-H | CWDM DFB laser, high sensitivity receiver, VistaLINK® |
| DWDM (Ordering Information) | |
|---|---|
| 7707VTDxxx-8-OC48 | DWDM DFB laser, VistaLINK® (Contact Factory for Wavelength Availability) |
| 7707VTDxxx-8-OC48-H | DWDM DFB laser, high sensitivity receiver, VistaLINK® (Contact Factory for Wavelength Availability) |
Ordering Options | |
|---|---|
| Notes | • Rear plate and fiber connector must be specified at time of order - eg: [model]+SC+3RU |
| Connector Suffix | |
|---|---|
| +SC | SC/PC |
| +FC | FC/PC |
| Rear Plate Suffix | |
|---|---|
| +3RU | 3RU rear plate for use with 350FR, 7700FR-C or 7800FR Multiframes |
Enclosures | |
|---|---|
| 350FR | Portable Multiframe which holds 7 single slot modules |
| 7700FR-C | 3RU Multiframe which holds 15 single slot modules |
| 7800FR | 3RU Multiframe which holds 15 single slot modules |