Product Manual
Features
- Transports signals over OC-48C/STM-16C data rates (2.488Gb/s)
- Single card TDM multiplexer for eight bi-directional asynchronous SD-SDI, SDTi and DVB-ASI signals
- Built-in Ethernet transceiver with one 10/100/1000 Base-T port with FBM (Fiber Bandwidth Management) technology
- Interfaces directly to SONET/SDH infrastructure
- Uncompressed, full-rate video transport
- Signal transport over fiber uninterrupted by loss of any input feed
- Transparently passes embedded AES or any other data in the horizontal or vertical ancillary data space
- Stratum 3 wander/holdover/jitter compliance
- Wide input frequency range tolerance (±50ppm)
- Fully hot-swappable from front of frame
- Supports single-mode and multi-mode fiber optic cable
- Optical output wavelengths of 1310nm, 1550nm, and up to sixteen CWDM wavelengths (ITU-T G.694.2 compliant)
- DWDM wavelength (ITU-T G.694.1 compliant) support
- SC/PC, FC/PC connector options
- Comprehensive signal and card status monitoring via four digit card edge display or remotely through SNMP and VistaLINK®
- VistaLINK® capable for remote monitoring via SNMP (using VistaLINK® PRO) when installed in 7800FR frame with a 7800FC VistaLINK® Frame Controller
- Occupies three card slots and can be housed in the 3RU 7800FR frame which has a 15 slot capacity, or the portable 3RU 350FR frame which has a 7 slot capacity.
Specifications
| Serial Video Intput | |
|---|---|
| Standards | SMPTE ST 259-C, DVB-ASI, SMPTE ST 305 (SDTi) |
| Number of Inputs | 8 |
| Connector | BNC per IEC 61169-8 Annex A |
| Equalization | Automatic to 250m @ 270Mb/s with Belden 1694 or equivalent cable |
| Return Loss | > 15dB up to 1.5Gb/s |
| Frequency Offset Tolerance | ±50ppm |
| Serial Video Output | |
|---|---|
| Standards | SMPTE ST 259-C, DVB-ASI, SMPTE ST 305 (SDTi) |
| Number of Outputs | 8 (+1 monitor with user selectable source) |
| Connector | BNC per IEC 61169-8 Annex A |
| Signal Level | 800mV nominal |
| DC Offset | 0V ±0.5V |
| Rise and Fall Time | 900ps nominal @ 270Mb/s |
| Overshoot | < 10% of amplitude |
| Return Loss | > 12dB |
| Wideband Jitter | < 0.2 UI |
| Serial Video Monitor Output | |
|---|---|
| Standards | SMPTE ST 259-C, DVB-ASI, SMPTE ST 305 (SDTi) |
| Number of Outputs | 1, signal user-selectable from the 8 inputs |
| Connector | BNC per IEC 61169-8 Annex A |
| Signal Level | 800mV nominal |
| DC Offset | 0V ±0.5V |
| Rise and Fall Time | 900ps nominal |
| Overshoot | < 10% of amplitude |
| Return Loss | > 12dB |
| Wideband Jitter | < 0.2 UI |
| Optical Output | |
|---|---|
| Standards | OC-48C/STM-16C |
| Number of Outputs | 1 |
| Connector | Female SC/PC or FC/PC |
| Return Loss | > 14dB |
| Wideband Jitter | < 0.2 UI |
| Fiber Size | 9µm core/125µm overall |
| Wavelength | |
| Standard | 1310nm, 1550nm (nominal) |
| CWDM | 1270nm to 1610nm (See Ordering Information) |
| DWDM | C-Band (ITU-T G.694.1 Compliant) (See Ordering Information) |
| Power | |
| 1310nm FP (Standard) | -6dBm ±1dBm |
| 1550nm & CWDM DFB | 0dBm ±1dBm |
| DWDM DFB | +7dBm ±1dBm |
| Optical Input | |
|---|---|
| Number of Inputs | 1 |
| Standards | OC-48C/STM-16C |
| Connector | Female SC/PC or FC/PC |
| Return Loss | > 25dB |
| Wavelength | 1270nm to 1610nm |
| Maximum Input Power | -1dBm |
| Optical Sensitivity | -23dBm |
| Electrical | |
|---|---|
| Voltage | +12V DC |
| Power | 25 Watts (non DWDM) or 30 Watts (DWDM) |
| Physical | |
|---|---|
| Number of Slots | 3 |
| Compliance | |
|---|---|
| Laser Safety | Complies with 24 CFR 1040.10 and 1040.11 |
| EMI/RFI | Complies with FCC regulations for class A devices Complies with EU EMC directive |
Ordering Information
| Eight Channel SDI + Ethernet SONET/SDH Fiber Transceiver | |
|---|---|
| 7707VB13-8-OC48 | 1310nm FP laser |
| 7707VB15-8-OC48 | 1550nm DFB laser |
| CWDM & DWDM (Ordering Information) | |
|---|---|
| 7707VBxx-8-OC48 | CWDM DFB laser |
| 7707VBDxxx-8-OC48 | DWDM DFB laser (Contact Factory for Wavelength Availability) |
| Ordering Options | |
|---|---|
| Notes | • Rear plate must be specified at time of order - eg: [model]+3RU |
| Connector Suffix | |
|---|---|
| +SC | SC/PC |
| +FC | FC/PC |
| Rear Plate Suffix | |
|---|---|
| +3RU | 3RU rear plate for use with 350FR, 7700FR-C or 7800FR Multiframes |
| Enclosures | |
|---|---|
| 350FR | Portable Multiframe which holds 7 single slot modules |
| 7700FR-C | 3RU Multiframe which holds 15 single slot modules |
| 7800FR | 3RU Multiframe which holds 15 single slot modules |
| Patch Cable | |
|---|---|
| CB-FP1M-SCPC | Single mode fiber cable, 1m, SC/PC male termination |
| CB-FP1M-STPC | Single mode fiber cable, 1m, ST/PC male termination |
| CB-FP5M-SCPC | Single mode fiber cable, 5m, SC/PC male termination |
| CB-FP5M-STPC | Single mode fiber cable, 5m, ST/PC male termination |
| CB-FP10M-SCPC | Single mode fiber cable, 10m, SC/PC male termination |
| CB-FP10M-STPC | Single mode fiber cable, 10m, ST/PC male termination |
