Interact with this product in a Layout Tool:
Features
- Three independent channels of optical to electrical conversion that support all SMPTE ST 292-1 standards at 1.485Gb/s
- Supports reclocking of all SMPTE ST 259 standards with operation from 143Mb/s - 360Mb/s
- Supports reclocking of additional standards of SMPTE ST 305 (SDTi), SMPTE ST 344 (540Mb/s), M2S and DVB-ASI (270Mb/s)
- Automatically operates in non-reclocking mode in the presence of rates not supported by reclocking
- Fully hot swappable from front of frame, with no fiber or BNC disconnect/reconnect required
- High density - accommodates up to 45 independent channels of optical conversion, in a single 3RU frame
- Occupies one card slot and can be housed in the 1RU 7801FR frame which holds up to four single or two dual slot modules, the 3RU 7800FR frame which has a 15 slot capacity, the portable 3RU 350FR frame which has a 7 slot capacity, or a standalone enclosure which holds a single module.
- Comprehensive signal and card status monitoring via four digit card edge display or remotely through SNMP and VistaLINK® capability
- VistaLINK® capable for remote monitoring via SNMP (using VistaLINK® PRO) when installed in 7800FR frame with a 7800FC VistaLINK® Frame Controller
- Detection and display of optical input power, and data rate
- Wide range optical input (1270nm-1610nm)
- Supports single-mode and multi-mode fiber optic cable
- SC/PC or FC/PC connector options
- Tally output on Frame Status bus upon loss of input signal
Specifications
Optical Input | |
|---|---|
| Number of Inputs | 3 (independent channels) |
| Connector | SC/PC, FC/PC female housing |
| Operating Wavelength | 1270nm to 1610nm |
| Maximum Input Power | -1dBm |
| Optical Sensitivity | -23dBm |
Serial Video Output | |
|---|---|
| Standard | SMPTE ST 292-1, SMPTE ST 259-A,B,C,D, SMPTE ST 305, SMPTE ST 310, SMPTE ST 344, M2S, DVB-ASI |
| Number of Outputs | 3 reclocked (independent channels) |
| Connector | BNC per IEC 61169-8 Annex A |
| Signal Level | 800mV nominal |
| DC Offset | 0V ±0.5V |
| Rise/Fall Time | |
| SD @270Mb/s | 600ps nominal |
| HD @1.485Gb/s | 150ps nominal |
| Overshoot | < 10% of amplitude |
| Return Loss | > 15dB up to 1.5GHz |
| Wideband Jitter | < 0.2UI (reclocked) |
Electrical | |
|---|---|
| Voltage | +12V DC |
| Power | 6 Watts |
| EMI/RFI | Complies with FCC Part 15 Class A, EU EMC Directive |
Physical | |
|---|---|
| Number of Slots | 1 |
Ordering Information
| 7707OE-3-HD | Triple HD Optical to Electrical Converter, 19.4Mb/s or 143Mb/s to 1.485Gb/s, VistaLINK® |
|---|
Ordering Options | |
|---|---|
| Notes | • Rear plate and fiber connector must be specified at time of order - eg: [model]+SC+3RU |
| Connector Suffix | |
|---|---|
| +SC | SC/PC |
| +FC | FC/PC |
| Rear Plate Suffix | |
|---|---|
| +1RU | 1RU rear plate for use with 7701FR Multiframe |
| +SA | Standalone Enclosure Rear Plate |
| +3RU | 3RU rear plate for use with 350FR, 7700FR-C or 7800FR Multiframes |
Enclosures | |
|---|---|
| 350FR | Portable Multiframe which holds 7 single slot modules |
| 7700FR-C | 3RU Multiframe which holds 15 single slot modules |
| 7800FR | 3RU Multiframe which holds 15 single slot modules |
| 7701FR | 1RU Multiframe which holds 3 single slot modules |
| S7701FR | 7700 Series Standalone Enclosure |