Evertz HD2014, HD2012 and HD2011 are high performance multi-path 1RU video conversion and frame synchronization platforms.
The HD2014 integrates four independent paths of video processing. All four paths can be fed from four different input signals. Each processing path includes full frame sync and up/down/cross conversion capabilities in addition to video proc and video enhancement capabilities.
The HD2012 integrates two independent paths of processing. Each path can be fed from two different device inputs. The HD2011 has the same capabilities as the HD2012, except that both processing paths must be fed from the same input video signal.
The processing power of the HD20xx series in combination with their simple-to-use front panel makes it an ideal choice for utility conversion applications within studio, ENG/DSNG truck or mobile environments.
The HD2014, HD2012 and HD2011 can support up to 4x coax serial digital inputs, 4x fiber optic serial digital inputs, 4x composite analog video inputs, 4x or 8x mono analog audio inputs, and 8x AES digital audio inputs*.
Analog video inputs are processed using 12-bit A/D converters and use 3D video decoding technology. DVI inputs are also supported with a resolution up to 1920 x 1080p.
The HD20xx series can support up to 4x coax serial digital outputs, 4x fiber optic serial digital outputs, 4x composite analog video outputs, 8x or 4x mono analog audio outputs and 8x AES digital audio outputs*. DVI outputs (720p and 1080i) can also be supported. A reference input is available to allow these units to lock to an external reference. SNMP control and monitoring is supported using the 10/100 Ethernet port. An integrated four input multi-image display is available as an ordering option.
These Evertz converters are packaged in a space-saving 1RU form factor and have local front panel control capabilities. Quick access hot keys for each processing channel are available on the front panel to enable easy changes to core processing parameters. Eight (8) front panel "HOT KEY MACROS" can be programmed with user controls to enable multi-parameter sets with a single button push. The HD20xx series can be ordered with dual AC power supplies. The HD20xx series can also support operation from externally supplied +12V DC power supply (1x AC inlet and 1x DC inlet supported).
- Fiber SFP modules ordered as separate accessories to enable fiber inputs/outputs
- One FL-xx flex module may be installed at a time
- One FR-xx flex module may be installed at a time
- 1x analog video input and 1x analog video output are standard
- Redundant power supply is an ordering option
- The +AA option supports analog audio with 4x in and 8x out
- The +AA2 option supports analog audio with 8x in and 4x out
HD2014 Rear Panel
Within the HD20xx architecture, 16 channels of audio are de-embedded from the input of each conversion path and sent to the internal audio processor. Eight discrete AES audio inputs and four/eight analog audio inputs can also be made available to the audio processor. Per channel audio delay, stereo to 5.1 upmixing (+UMX), 5.1 to stereo downmixing (+DMX), IntelliGain™ audio loudness management (+IG) and audio band equalization (+EQ) can be performed on selected input audio channels*.
Following the audio processor, 16 channels of audio may be embedded into each of the outgoing video processors. Each of the four audio embedders can support audio inversion, gain, mono mixing and channel swapping capabilities. Similar per channel audio routing, inversion, gain and mono-mixing capabilities are available for the 8 x AES outputs and the four/eight mono analog audio outputs.
Specifications
| Coax Inputs | |
|---|---|
| Number of Inputs | 4 |
| Connector | BNC per IEC 61169-8 Annex A |
| Input Equalization | 300m @ 270MB/s with Belden 1694A or equivalent 100m @ 1.5GB/s with Belden 1694A or equivalent |
| Return Loss | > 15dB to 1.5GHz |
| Data Rate | Auto-sensing SD/HD/3G |
| Formats | 525i/59.94, 625i/50, 720p/59.94, 720p/50, 1080i/59.94, 1080i/50 |
| Fiber Inputs | |
|---|---|
| Number of Inputs | 4 |
| Connector | LC |
| Form Factor | Dual Optical SFP Receiver |
| Wavelength | 1260-1620nm |
| Data Rate | Auto-sensing SD/HD/3G |
| Formats | 525i/59.94, 625i/50, 720p/59.94, 720p/50, 1080i/59.94, 1080i/50 |
| DVI and Analog Video Inputs | |
|---|---|
| Number of Inputs | 1 |
| Connector | DVI-I (female) |
| Breakout Cable | DVI-I to DVI-D and 5x RGBHV BNCs |
| Standards | |
| DVI-D | 1080p/720p @ 59.94Hz (no HDCP) |
| DVI-D | 1080p/720p @ 50Hz (no HDCP) |
| CVBS | NTSC on G channel |
| CVBS | PAL on G channel |
| Analog Audio Inputs | |
|---|---|
| Number of Inputs | 4 |
| Type | Mono signals, balanced analog audio |
| Connector | Removable terminal strip |
| Input Impedence | 10kΩ minimum (differential) |
| Sampling Frequency | Analog signal sampled at 48kHz |
| Signal Level | 0dBFS = 19dBu/25dBu software selectable |
| Frequency Response | ±0.5dB (20Hz to 20kHz) |
| THD+N | > 99dB (20Hz to 20kHz, -1dBFS) |
| CMRR | > 85dB @ 100Hz |
| AES Audio Inputs | |
|---|---|
| Number of Inputs | 8 |
| Standard | SMPTE ST 276, synchronous or asynchronous |
| Connector | DB15 |
| Input Type | Unbalanced |
| Impedence | 75Ω |
| Signal Level | 1V p-p |
| Sampling Rate | 48kHz |
| Reference | Input and passive loop |
| Type | NTSC bi-level sync PAL colour-bi-level sync |
| Connector | BNC per IEC 61169-8 Annex A |
| GPIO | |
|---|---|
| Number of Inputs | 8 (configurable as inputs or outputs) |
| Type | Opto-isolated, active low with internal pull-ups to +5V |
| Connector | Removable terminal block |
| Signal Level | Closure to ground |
| Function | Virtual front panel button push Tally of front panel button push |
| Coax Outputs | |
|---|---|
| Number of Outputs | 4 |
| Connector | BNC per IEC 61169-8 Annex A |
| Signal Level | 800mV nominal |
| DC Offset | 0V ±0.5V |
| Rise/Fall Time | 200ps nominal |
| Overshoot | < 10% of amplitude |
| Return Loss | > 15dB to 1.5GHz |
| Wide Band Jitter | < 0.20UI |
| Formats | 525i/59.94, 625i/50, 720p/59.94, 720p/50, 1080i/59.94, 1080i/50 |
| Fiber Outputs | |
|---|---|
| Number of Outputs | 4 |
| Connector | LC |
| Form Factor | Dual Optical SFP Receiver |
| Wavelength | 1310nm |
| Data Rate | SD and HD (270MB/s and 1.5GB/s) |
| Formats | 525i/59.94, 625i/50, 720p/59.94, 720p/50, 1080i/59.94, 1080i/50 |
| DVI and Analog Video Outputs | |
|---|---|
| Number of Outputs | 1 |
| Connector | DVI-I (female) |
| Breakout Cables | DVI-I to DVI/RGBHV cable, DVI "Y Cable" break out cable |
| Standards | |
| DVI-D Out A | 1080p/720p @ 59.94Hz (no HDCP) |
| DVI-D Out A | 1080p/720p @ 50Hz (no HDCP) |
| DVI-D Out B | 1680x1050 out when running 1080i |
| DVI-D Out B | 1920x1080p out when running 720p |
| DVI-D Out B | 1440x900 out when running 525i |
| CVBS | NTSC on G channel |
| CVBS | PAL on G channel |
| Analog Audio Outputs | |
|---|---|
| Number of Outputs | 8 |
| Type | Mono signals, balanced analog audio |
| Connector | Removable terminal strip |
| Output Impedence | 60Ω max |
| Output Loads | Hi Z |
| Peak Conv Level | 0dBFS = 18dBu/24dBu software selectable |
| Sampling Frequency | 48kHz |
| Frequency Response | ±0.1dB (20Hz to 20kHz) |
| THD+N | > 80dB (20Hz to 20kHz, -1dBFS) |
| AES Audio Inputs | |
|---|---|
| Number of Outputs | 8 |
| Standard | SMPTE ST 276 |
| Connector | DB15 |
| Output Type | Unbalanced |
| Impedence | 75Ω |
| Signal Level | 1V p-p |
| Sampling Rate | 48kHz |
Ordering Information
| HD2014 | 1RU Multi-Path Video Converter and Frame Synchronizer with Four Path Processing |
|---|---|
| HD2012 | 1RU Multi-Path Video Converter and Frame Synchronizer with Two Path Processing |
| HD2011 | 1RU Multi-Path Video Converter and Frame Synchronizer with Dual Output Single Path Processing |
| HD2014-3G | 1RU Multi-Path Video Converter and Frame Synchronizer with Four Path Processing |
|---|---|
| HD2012-3G | 1RU Multi-Path Video Converter and Frame Synchronizer with Two Path Processing |
| HD2011-3G | 1RU Multi-Path Video Converter and Frame Synchronizer with Dual Output Single Path Processing |
| Accessories | |
|---|---|
| WPDVI-DVIBNC5 | DVI to DVI/RGBHV breakout cable |
| WPDVI-DVI2 | DVI "Y" breakout cable |
| WPAES8-BNCM-9W-6F | AES audio break-out cable (8x unbalanced connectors, 1x DB15 connector) 1x cable required for AES inputs. 1x cable required for AES outputs. |
| Ordering Options | |
|---|---|
| +AA | Balanced Analog Audio I/O (4x in and 8x out) |
| +AA2 | Balanced Analog Audio I/O (8x in and 4x out) |
| +2PS | Redundant AC Power Supply |
| +MVR | Internal Multi-Viewer (Quad Split) |
| +UMX | Stereo to 5.1 PCM Surround sound Up-mix |
| +DMX | 5.1 to 2-Channel Stereo Down-mix |
| +IG | IntelliGain™ Audio Loudness Management |
| +FL-HIO | Triple Bi-directional HD/SD I/O Flex Module |
| +FL-CD3 | Triple Composite Analog Video Input Flex Module |
| +FR-HIO | Triple Bi-directional HD/SD I/O Flex Module |
| +FR-CE3 | Triple Composite Analog Video Output Flex Module |
| +2TX | 1x Dual SFP Fiber Transmitter (two fiber outputs) |
| +4TX | 2x Dual SFP Fiber Transmitter (four fiber outputs) |
| +2RX | 1x Dual SFP Fiber Receiver (two fiber outputs) |
| +4RX | 2x Dual SFP Fiber Receiver (four fiber outputs) |
