Product Manual
Features
- Single card TDM multiplexer for six bi-directional asynchronous HD-SDI, or eight bi-directional asynchronous SD-SDI, or DVB-ASI signals or any combination thereof with maximum total bandwidth of 9GB/s
- Built-in Ethernet transceiver with one 10/100/1000 Base-T port with FBM (Fiber Bandwidth Management) technology
- Uncompressed, full-rate video transport
- Signal transport over fiber uninterrupted by loss of any input feed
- Transparently passes embedded AES or any other data in the horizontal or vertical ancillary data space
- Fully hot-swappable from front of frame
- Supports single-mode fiber optic cable
- Optical output wavelengths of 1310nm, 1550nm, and up to eight CWDM wavelengths (1470nm -1610nm)
- DWDM wavelength (ITU-T G.694.1 compliant) support
- Pluggable Evertz XFP module permits wavelength swapping/sparing
- Comprehensive signal and card status monitoring via four digit card edge display or remotely through SNMP and VistaLINK®
- VistaLINK® capable for remote monitoring via SNMP (using VistaLINK® PRO) when installed in 7800FR frame with a 7800FC VistaLINK® Frame Controller
- Occupies three card slots and can be housed in the 3RU 7800FR frame which has a 15 slot capacity, or the portable 3RU 350FR frame which has a 7 slot capacity.
Specifications
| Serial Video Input | |
|---|---|
| Standards | SMPTE ST 292-1, SMPTE ST 259-C, DVB-ASI, SMPTE 305M (SDTi) |
| Number of Inputs | 8 |
| Connector | BNC per IEC 61169-8 Annex A |
| Equalization | Automatic to 70m @ 2.470GB/s, 100m @ 1.485GB/s, and 250m @ 270MB/s with Belden 1694A or equivalent |
| Return Loss | > 15dB up to 1.5GB/s |
| Serial Video Output | |
|---|---|
| Standards | SMPTE ST 292-1, SMPTE ST 259-C, DVB-ASI, SMPTE 305M (SDTi) |
| Number of Outputs | 8 (output #8 is selectable as an output or monitor port) |
| Connector | BNC per IEC 61169-8 Annex A |
| Signal Level | 800mV nominal |
| DC Offset | 0V ±0.5V |
| Rise And Fall Time | 900ps nominal @ 270MB/s, < 270ps @ 1.485G/bs |
| Overshoot | < 10% of amplitude |
| Return Loss | > 15dB to 1.5GB/s |
| Wideband Jitter | < 0.2UI |
| Optical Output | |
|---|---|
| Number of Outputs | 1 |
| Connector | Female LC Duplex |
| Fiber Size | 9µm core/125µm overall |
| Wavelength | |
| Standard | 1310nm, 1550nm (nominal) |
| CWDM | 1470nm to 1610nm |
| DWDM | D200 to D590 |
| Power | |
| 1310nm | -6dBm -1dBm |
| 1550nm | -1dBm +2dBm |
| CWDM | +1dBm to +4dBm |
| DWDM DFB | -1dBm to +2dBm |
| Optical Input | |
|---|---|
| Number of Inputs | 1 |
| Connector | Female LC Duplex |
| Wavelength | 1270nm to 1610nm |
| Maximum Input Power | |
| Standard | -1dBm |
| High Sensitivity | -7dBm |
| Optical Sensitivity | |
| Standard | -14dBm |
| High Sensitivity | -22dBm |
| Electrical | |
|---|---|
| Voltage | +12V DC |
| Power | 20 watts |
| Physical | |
|---|---|
| Number of Slots | 3 |
| Compliance | |
|---|---|
| Laser Safety | Complies with 24 CFR 1040.10 and 1040.11 |
| EMI/RFI | Complies with FCC regulations for Class A devices Complies with EU EMC directive |
Ordering Information
| 7708VB-8-HSE | 8x HD/SDI/DVB-ASI + Ethernet Fiber Transceiver, VistaLINK |
|---|
| XFP Options | |
|---|---|
| XFPTR-13 | Optical XFP Transceiver, 10km, 1310nm laser |
| XFPTR-15 | Optical XFP Transceiver, 40km, 1550nm laser |
| CWDM (Ordering Information) | |
|---|---|
| XFPTR-Cxx-H | Optical XFP Transceiver, CWDM Transmitter, High sensitivity Receiver, 10Gb/s, xx=47 to 61 (1470nm-1570nm rated for 80km, 1590 - 1610nm rated for 70km) Wavelengths |
| DWDM (Ordering Information) | |
|---|---|
| XFPTR-DxxxH | Optical XFP Transceiver, 80km, DWDM laser (ITU ch. 20 to 59) (Contact Factory for Wavelength Availability) |
| Ordering Options | |
|---|---|
| Notes | • Rear plate must be specified at time of order - eg: [model]+3RU |
| Rear Plate Suffix | |
|---|---|
| +3RU | 3RU rear plate for use with 350FR, 7700FR-C or 7800FR Multiframes |
| Enclosures | |
|---|---|
| 350FR | Portable Multiframe which holds 7 single slot modules |
| 7700FR-C | 3RU Multiframe which holds 15 single slot modules |
| 7800FR | 3RU Multiframe which holds 15 single slot modules |
| Patch Cable | |
|---|---|
| CB-FP1M-SCPC | Single mode fiber cable, 1m, SC/PC male termination |
| CB-FP1M-STPC | Single mode fiber cable, 1m, ST/PC male termination |
| CB-FP5M-SCPC | Single mode fiber cable, 5m, SC/PC male termination |
| CB-FP5M-STPC | Single mode fiber cable, 5m, ST/PC male termination |
| CB-FP10M-SCPC | Single mode fiber cable, 10m, SC/PC male termination |
| CB-FP10M-STPC | Single mode fiber cable, 10m, ST/PC male termination |
