Interact with this product in a Layout Tool:
Features
- Single card demultiplexer for four synchronous or asynchronous 270Mb/s SDI, SDTi or DVB-ASI video signals
- Low jitter SDI outputs
- Independent signal outputs unaffected by loss of any other SDI or DVB-ASI input feed
- Transparently passes embedded AES or any other data in the horizontal or vertical ancillary data space
- Fully Hot-swappable from front of frame with no fiber disconnect/reconnect required
- Supports single-mode and multi-mode fiber optic cable
- Accepts any wavelength in the 1270nm to 1610nm range
- SC/PC, FC/PC connector options
- Comprehensive signal and card status monitoring remotely through SNMP and VistaLINK® capability
- VistaLINK® capable for remote monitoring via SNMP (using VistaLINK® PRO) when installed in 7800FR frame with a 7800FC VistaLINK® Frame Controller
- Occupies one card slot and can be housed in the 1RU 7801FR frame which holds up to four single or two dual slot modules, the 3RU 7800FR frame which has a 15 slot capacity, the portable 3RU 350FR frame which has a 7 slot capacity, or a standalone enclosure which holds a single module.
Specifications
Optical Input | |
|---|---|
| Number of Inputs | 1 |
| Connector | Female SC/PC or FC/PC |
| Return Loss | > 25dB |
| Wavelength | 1270nm to 1610nm |
| Maximum Input Power | |
| Standard | -1dBm |
| High Sensitivity (-H) | -8dBm |
| Optical Sensitivity | |
| Standard | -23dBm |
| High Sensitivity (-H) | -28dBm |
Serial Video Output | |
|---|---|
| Standard | SMPTE ST 259-C, SMPTE ST 305, DVB-ASI |
| Number of Outputs | 4 independent SDI, SDTi or DVB-ASI 270Mb/s signals |
| Connector | BNC per IEC 61169-8 Annex A |
| Signal Level | 800mV nominal |
| DC Offset | 0V ±0.5V |
| Rise/Fall Time | 900ps nominal |
| Overshoot | < 10% of amplitude |
| Return Loss | > 15dB up to 270Mb/s |
| Wideband Jitter | < 0.2UI |
Electrical | |
|---|---|
| Voltage | +12V DC |
| Power | 10 Watts |
| EMI/RFI | Complies with FCC Part 15 Class A, EU EMC Directive |
Physical | |
|---|---|
| Number of Slots | 1 |
Ordering Information
| 7707VR-4 | Quad SDI/ASI Demux Fiber Receiver |
|---|---|
| 7707VR-4-H | High Sensitivity Quad SDI/ASI Demux Fiber Receiver |
Ordering Options | |
|---|---|
| Notes | • Rear plate and fiber connector must be specified at time of order - eg: [model]+SC+3RU |
| Connector Suffix | |
|---|---|
| +SC | SC/PC |
| +FC | FC/PC |
| Rear Plate Suffix | |
|---|---|
| +1RU | 1RU rear plate for use with 7701FR Multiframe |
| +SA | Standalone Enclosure Rear Plate |
| +3RU | 3RU rear plate for use with 350FR, 7700FR-C or 7800FR Multiframes |
Enclosures | |
|---|---|
| 350FR | Portable Multiframe which holds 7 single slot modules |
| 7700FR-C | 3RU Multiframe which holds 15 single slot modules |
| 7800FR | 3RU Multiframe which holds 15 single slot modules |
| 7701FR | 1RU Multiframe which holds 3 single slot modules |
| S7701FR | 7700 Series Standalone Enclosure |