Download PDF

7707AT-A8 & 7707AT-A12

Eight/Twelve Channel Analog Audio Fiber Transmitter Mux

Product ManualManual
  • VistaLINK® enabled
  • Dolby Partner
Features
  • Eight or twelve professional quality analog audio fiber optic transmitter
  • Adjustable audio detection for each channel
  • Audio monitoring via card-edge headphone jack with adjustable volume
  • All configuration settings controllable through the card-edge user interface, or remotely through SNMP and VistaLINK®
  • Optical output wavelengths of 1310nm, 1550nm, and up to sixteen CWDM wavelengths (ITU-T G.694.2 compliant)
  • DWDM wavelengths also available (ITU-T G.694.1 compliant)
  • Supports single-mode and multi-mode fiber optic cable
  • SC/PC, ST/PC, or FC/PC fiber connector options
  • Fully hot swappable from front of frame
  • Comprehensive signal and card status monitoring via four digit card edge display or remotely through SNMP and VistaLINK® capability
  • VistaLINK® capable for remote monitoring via SNMP (using VistaLINK® PRO) when installed in 7800FR frame with a 7800FC VistaLINK® Frame Controller
Block DiagramBlock Diagram

Specifications

Analog Audio Input
Number of Inputs
7707AT-A88
7707AT-A1212
ConnectorMulti-pin removable terminal blocks
Level+24dBu (max)
Frequency Response±0.1dB (max, 20Hz to 20KHz)
THD+N-90dB or 0.003% (max, 20Hz to 20kHz, @0dBFS)
Crosstalk-100dB (max, 20Hz to 20kHz, measured channel connected at input)
SNR100dB (min)
Channel Phase±0.5° (max, 20Hz to 20kHz)
Impedance10kΩ (min. differential)
Resolution24 bits
Optical Output
Number of Outputs1
ConnectorSC/PC, ST/PC, FC/PC female housing
WavelengthSee Ordering Information
Power
1310nm FP (Standard)-7dBm ±1dBm
CWDM DFB0dBm ±1dBm
DWDM DFB+7dBm ±1dBm
Electrical
Voltage+12V DC
Power
7707AT-A88 Watts (Non-DWDM) or 10 Watts (DWDM)
7707AT-A1210 Watts (Non-DWDM) or 12 Watts (DWDM)
Physical
Number of Slots
7700 Frame Mounting
7707AT-A81
7707AT-A122
7701 Frame Mounting1 - all versions
Compliance
Laser SafetyClass 1 laser product, complies with 24CFR 1040.10 and 1040.11, IEC 60825-1
EMI/RFIComplies with FCC Part 15, Class A, EU EMC Directive

Ordering Information

7707AT13-A8Eight channel Analog Audio Fiber Transmitter Mux, 1310nm FP laser
7707AT15-A8Eight channel Analog Audio Fiber Transmitter Mux, 1550nm DFB laser
7707AT13-A12Twelve channel Analog Audio Fiber Transmitter Mux, 1310nm FP laser
7707AT15-A12Twelve channel Analog Audio Fiber Transmitter Mux, 1550nm DFB laser
CWDM (Ordering Information)
7707ATxx-A8Eight channel Analog Audio Fiber Transmitter Mux, CWDM DFB laser
7707ATxx-A12Twelve channel Analog Audio Fiber Transmitter Mux, CWDM DFB laser
DWDM (Ordering Information)
7707ATDxxx-A8Eight channel Analog Audio Fiber Transmitter Mux, DWDM DFB laser
7707ATDxxx-A12Twelve channel Analog Audio Fiber Transmitter Mux, DWDM DFB laser
Ordering Options
Notes• Rear plate and fiber connector must be specified at time of order - eg: [model]+SC+3RU
Connector Suffix
+SCSC/PC
+STST/PC
+FCFC/PC
Rear Plate Suffix
+1RU1RU rear plate for use with 7701FR Multiframe
+SAStandalone Enclosure Rear Plate
+3RU3RU rear plate for use with 350FR, 7700FR-C or 7800FR Multiframes
Enclosures
350FRPortable Multiframe which holds 7 single slot modules
7700FR-C3RU Multiframe which holds 15 single slot modules
7800FR3RU Multiframe which holds 15 single slot modules
7701FR1RU Multiframe which holds 3 single slot modules
S7701FR7700 Series Standalone Enclosure
Patch Cable
CB-FP1M-SCPCSingle mode fiber cable, 1m, SC/PC male termination
CB-FP1M-STPCSingle mode fiber cable, 1m, ST/PC male termination
CB-FP5M-SCPCSingle mode fiber cable, 5m, SC/PC male termination
CB-FP5M-STPCSingle mode fiber cable, 5m, ST/PC male termination
CB-FP10M-SCPCSingle mode fiber cable, 10m, SC/PC male termination
CB-FP10M-STPCSingle mode fiber cable, 10m, ST/PC male termination