Skip to Main Content


Analog Video Distribution Amplifier

Interact with this product in a Layout Tool:

The 7700ADA7 Analog Distribution Amplifier is a general-purpose amplifier for distributing analog video signals. The 7700ADA7 features one balanced input with seven outputs. The 7700ADA7 amplifier has been designed to distribute a wide range of analog video signals. It can also distribute other pulses and signals that are less than 2V p-p.

The 7700ADA7 occupies one card slot and can be housed in the 1RU 7801FR frame which holds up to four single or two dual slot modules, the 3RU 7800FR frame which has a 15 slot capacity, the portable 3RU 350FR frame which has a 7 slot capacity, or a standalone enclosure which holds a single module.


  • 75Ω or high impedance input (jumper selectable)
  • High common mode range and common mode rejection ratio (CMRR)
  • Gain control
  • Jumper selectable AC or DC coupling
  • Looping feature with external "T" connector
  • Consistent input impedance if card power is lost


Analog Video Input

Standards Any analog video format, up to 2V p-p and 30MHz bandwidth
Connector BNC per IEC 61169-8 Annex A
Common Mode Range > 6V p-p
CMRR > 70dB to 1kHz
Signal Amplitude 2.5V p-p max
Impedance 75Ω terminated, 35kΩ Hi-Z (jumper selectable)
Coupling AC or DC (jumper selectable)
Return Loss > 40dB to 10MHz, > 30dB to 30MHz

Analog Video Outputs

Number of Outputs 7 per card
Connector BNC per IEC 61169-8 Annex A
Output Impedance 75Ω
Gain Control Range ±5dB
DC level < ±100mV (DC Coupling active)
Frequency Response < ±0.05dB (to 5.5MHz)
Differential Gain < 0.17%
Differential Phase < 0.19°
C/L Gain Inequality < ±0.1%
C/L Delay < ±2ns
Output Isolation 42dB to 10MHz, 32dB to 30MHz
Output Return Loss > 40dB to 30MHz
Noise Performance < -78dB RMS NTC7 weighting, < -70dB RMS 15kHz to 5.5MHz


Voltage +12V DC
Power 4.6 watts
EMI/RFI Complies with FCC Part 15, Class A, EU EMC Directive


Number of Slots 1

Ordering Information

7700ADA7 Analog Video Distribution Amplifier

Ordering Options

Notes Rear plate must be specified at time of order - eg: [model]+3RU
Rear Plate Suffix
+1RU 1RU rear plate for use with 7701FR Multiframe
+SA Standalone Enclosure Rear Plate
+3RU 3RU rear plate for use with 350FR, 7700FR-C or 7800FR Multiframes


350FR Portable Multiframe which holds 7 single slot modules
7700FR-C 3RU Multiframe which holds 15 single slot modules
7800FR 3RU Multiframe which holds 15 single slot modules
7701FR 1RU Multiframe which holds 3 single slot modules
S7701FR 7700 Series Standalone Enclosure