Interact with this product in a Layout Tool:
EMR-IO8-MADI-A is part of our EMR audio router family which has a number of IO module flavors than can span across a number for frame and frame types. All the IO modules can connect to a ADMX core (redundant is optional), these Audio cores could be standalone modules or intergraded into a video router like the NEXX routing solution. Focus here is a the dedicated MADI module, that is designed to fit in the EMX modular frames or with FP adapter the evFR-series. This module physically used 1 slots in a EMX or evFR series of frames and can support up to 16 MADI in and 16 MADI out, where all the audio channel with in the MADI are covered across man and redundant TDMv2 or TDMv3 ports.
Advanced features
internally there is 640 CH DSP with the ability to mix channels, and then on per channel basis has the ability for inversion, mute, gain and fade. 640 Channels of audio monitor for Level, silence and phase.
Helpful troubleshooting tools
On top of the 640-channel audio monitor for level, silence and phase the EMR-IO8-MADI also provides status and error reporting for all TDM ports. Always helpful to have a locally 128 CH signal generator, also has a very popular setup and troubleshooting control that will allow Audio Port D to be configured for 3G-SDI that will then have a 640CH audio bar display output.
Features
- Dual hot TDM Redundancy
- License enabled Delay option for 512 channels of audio
- 640-channel of audio DSP (MIX, Inversion, mute, gain and fade)
- 640-channel of audio monitor for level, silence and phase
- Internal audio tone generator (128 channels of audio)
- AUX post D Video output with up to 640 channels of audio bar
- 2 MADI inputs with SRC
- Magnum EMR container makes integration and configuration simple
- SNMP monitoring
Licence enabled options
The EMR-IO8-MADI has a licence options to enable a block of Delay that supports 512 channels, and a license to enable and additional 8x8 MADI for a full 16x16 MADI
Specifications
EMX Frame Reference | |
|---|---|
| Reference Inputs | 2x BNC, analog 525/625 |
| Impedance | 75Ω terminating |
| Connectors | BNC per IEC 61169-8 Annex A |
MADI | |
|---|---|
| Receiver Performance | > 160m |
| Coax Connectors | DIN 1.0/2.3 |
| SFP | MSA Transceiver style SPF+ ports |
TDM |
|---|
- TDMv2 and v3 software selectable, total of up to 512 mono audio channel per on these modules
Video Output |
|---|
- 3G-SDI video output over coax for VU meter audio bars display
Ordering Information
| EMR-IO8-MADI-A | MADI module with base card licensed for 8x8 MADI, an additional 8x8 can be enabled for a total of 16x16 MADI, supporting main and redundant TDMv2 and TDMv3 ports |
|---|
License Enabled Options | |
|---|---|
| EMR-FK-DLY-512 | Software license to enable up to 512 assignable channels of delay for EMR Audio modules |
| EMR-FK-MADI-8 | Software license to enable an additional 8x8 MADI channels to EMR-IO8-MADI-A to make it 16x16 MADI |
| Rear Plate Suffix | |
|---|---|
| +6RU | 6RU rear plate for use in 6RU slots |
Enclosures | |
|---|---|
| EMX1-FR | 1RU EMX Router frame which holds 2 single slot modules |
| EMX3-FR | 3RU EMX Router frame which holds 5 single slot modules |
| EMX6-FR | 6RU EMX Router frame which holds 15 single slot modules |
| EMX6-FR-1200W | 6RU EMX Router frame which holds 15 single slot modules; 1200W power supply |
| ev1-FR | 1RU EV Series processing multiframe which holds 2 single slot modules |
| ev3-FR | 3RU EV Series processing multiframe which holds 5 single slot modules |
| ev6-FR | 6RU EV Series processing multiframe which holds 15 single slot modules |
| ev6-FR-1200W | 6RU EV Series processing multiframe which holds 15 single slot modules; 1200W power supply |
EMX Frame Ordering Options | |
|---|---|
| +6PS | 1200W Redundant power supply |
| +3PS | Redundant Power Supply for EMX3-FR |
| +PS | Redundant power supply for EMX1-FR |
EMX Frame Accessories | |
|---|---|
| EMX-FC | Frame controller for EMX Frames, provides Ethernet interface for external control and monitoring |
EV Frame Ordering Options | |
|---|---|
| 670EMR-FP-1-KIT | This is a single-slot front plate kit that will allow for use of 1-slot EMR audio modules in a 670 Frame. |