Skip to Main Content

EMR-IP48-AA & EMR-OP48-AA

EMR Series - Analogue Audio Input and Output Modules

Interact with this product in a Layout Tool:

The EMR Analogue Audio modules are key part of the EMR-audio router family, providing line level analogue audio connection options and expandability in blocks of 48. EMR offers expansion beyond the constrains of a single frame with TDM coax connection to the ADMX audio TDM crosspoint packet routing core.

ADMX cores can be paired up to provide a dual hot redundancy setup for ultimate audio crosspoint redundancy. The analogue audio input module provides dual redundant outputs and the output module provides failover on link and packet basis.

The EMR analogue modules can be combined with ADMX and other EMR audio modules for the ability to route audio universally across various formats: AES, analogue, MADI, Studer A-Link, Calrec Hydra2, SMPTE ST 2110-30, ST 302M, Dante® and embedded audio. This unique audio routing solution provides an extremely robust and flexible any-audio-type to any-audio-type in an unblocking manner down to the mono audio channel level.

Features

  • Modular with passive rearplate
  • TDM redundancy
  • Signal processing per channel:
    • Phase inversion
    • Delay up to 1.3s
    • Gain ±24 dBu
  • Audio tone generator per channel
  • Monitoring:
    • SNMP
    • Front 1/8 headphone jack
    • Video OP with VU monitors

Specifications

Analogue Audio

Sampling Frequency 48kHz
Frequency Response 0.08dB (20Hz-20kHz range)
Output Impedance 400Ω
Input Impedance 12kΩ min.
Signal Level 0dBfs = 18dBu or 24dBu
Noise -110dB A-weighted
THD+N > 95dB (typically > 98dB)
DC Offset > 30mV
Crosstalk < -95dB
I/O Delay 1.3ms @ 48kHz
Dynamic Range 24 bits
Connectors D50 female

Analogue to Digital Conversion

Sampling Frequency 48kHz
Frequency Response 0.05dB (20Hz-20kHz range)
Input Impedance 12kΩ min.
Signal Level 0dBu to 18dBu or 24dBu
Noise -113dB A-weighted
THD+N > 95dB (typically > 98dB)
CMRR > 85dB @ 1kHz
Crosstalk < -95dB
I/O Delay 0.85ms @ 48kHz
Connectors D50 female

Digital to Analogue Conversion

Sampling Frequency 48kHz
Frequency Response 0.06dB (20Hz-20kHz range)
Output Impedance 400Ω
Signal Level 0dBfs to 18dBu or 24dBu
Noise -115dB A-weighted
THD+N > 95dB (typically > 98dB)
DC Offset > 30mV
Crosstalk < -95dB
I/O Delay 1.3ms @ 48kHz
Dynamic Range 24 bits
Connectors D50 female

TDM

  • TDMv1 and v2 software selectable, total of 160 mono audio channel

MADI

  • 1x 64-channel MADI coax input

Video Output

  • 720p video output over coax for VU meter audio bars display

Frame Reference

Reference Inputs 2x BNC, analog 525/625
Impedance 75Ω terminating
Connectors BNC per IEC 61169-8 Annex A

Ordering Information

EMR-IP48-AA 48 stereo analog audio inputs via D50 connectors with TDM outputs via DIN connectors. Also includes one MADI input as standard.
EMR-OP48-AA 48 stereo analog audio outputs via D50 connectors with TDM inputs via DIN connectors. Also includes one MADI output as standard.
Rear Plate Suffix
+6RU 6RU rear plate for use in 6RU slots

Enclosures

EMX6-FR 6RU EMX Router frame which holds 15 single slot modules
EMX3-FR 3RU EMX Router frame which holds 5 single slot modules
EMX1-FR 1RU EMX Router frame which holds 2 single slot modules
ev1-FR 1RU EV Series processing multiframe which holds 2 single slot modules
ev3-FR 3RU EV Series processing multiframe which holds 5 single slot modules
ev6-FR 6RU EV Series processing multiframe which holds 15 single slot modules

EMX Enclosure Accessories and Options

EMX-FC Frame controller for EMX Frames, provides Ethernet interface for external control and monitoring
+6PS Redundant Power Supply
+3PS Redundant Power Supply
+PS Redundant Power Supply for EMX1-FR

EV Enclosure Adapter Front Plates

670EMR-FP-2-KIT Dual-slot front plate kit that will allow for use of 2-slot EMR audio modules in a 670 Frame