Interact with this product in a Layout Tool:
The EMR-64x64-3G is a 64-input by 64-output modular router designed to natively switch 12G, 6G, 3G, HD, and SD signals. It supports UHD signals as quad-link using deterministic routing. Single-link 12G and 6G support can also be added as a feature key. A variety of different rear plates are available that provide connections via HDBNC, fiber or a combination of both.
For maximum control flexibility, this router can be used in conjunction with Evertz award-winning MAGNUM Unified Control System. Or, for smaller systems, the router can host a number of Evertz control panel models over Ethernet.
Control • The EMR-64x64-3G is housed in any of the standard Evertz EMX6 or EMX3 frames supporting dual frame controllers, providing redundant control connections.
Remote Control Panel • Any traditional or simple Evertz control panels can be used with the EMR-64x64-3G while hosted either locally or through the control system.
External Third-Party Control • The EMR-64x64-3G can be controlled remotely via external third-party control devices, such as an automated system.
Power Supply • The EMR-64x64-3G is housed in standard Evertz EMX6 or EMX3 frames, both of which support dual hot-swappable power supplies ensuring continuous operation.
Technical • The EMR-64x64-3G as a base card offers a full 3GB/s bandwidth. UHD&4K support can also be enabled with a feature key. Automatic bit rate detection on the input equalizer allows any mix of 12G, 6g 3G, HD and SD signals in the same unit. Clean and quiet switching is also available on any six outputs with a feature key.
Features
- Designed with up to 12GB/s input EQs and output reclockers
- Full broadcast specifications
- Router control using Quartz native and 3rd party protocols
- Redundant Ethernet network connections
- Redundant Power
- Full VistaLINK® PRO command and control, SNMP
- Output up to 12G - reclocking on/off
- Rear plate support for HDBNC, fiber or both
- Router supports routing of many different signal rates, 10 and 12bit signals
Exceptional Signal support
Full signal support for following signals on all ports:
- 12G [3840x2160] & [4096x2160] at 25p, 29.97p, 50p, 59.94p
- 6G [3840x2160] & [4096x2160] at 25p, 29.97p
- 3GA [1920x1080] & [2048x1080] at 25p, 29.97p, 50p, 59.94p
- 3GB [1920x1080] & [2048x1080] at 25p, 29.97p, 50p, 59.94p
- HD [2048x1080] at 25p, 29.97p
- HD [1920x1080] & [1280x720] at 25p, 29.97p, 50i, 59.94i
- 270M (50 and 59.94 and ASI)
Specifications
Serial Video Inputs | |
|---|---|
| Standard | 12G, 6G, 3G, 1.5G, SD, and ASI |
Serial Video Outputs | |
|---|---|
| Standard | Same as input |
Switching Reference | |
|---|---|
| Reference Inputs | 2x BNC, Analog 625/525 |
| Signal Level | 1V p-p ±3dB |
| Impedance | 75Ω |
Control | |
|---|---|
| Ethernet | 2x RJ-45 |
| Protocol | Quartz, SNMP, Probel SW-P-02 & -08 and GVG SMS7000 |
| Serial Signal | RS-232/RS-422 |
| Webpage | WEBeASY |
Electrical | |
|---|---|
| EMX6-FR | |
| AC Mains Input | Auto-ranging, 100⇔240V AC, 50/60Hz |
| Max Operating Current | 9.5A (@ 115V AC nominal) 4.0A (@ 220V AC nominal) |
| Max Power Consumption | 650 watts (40 watts per slot) |
| Power Supply Configuration | 1 supply standard, optional redundant supply requires separate inlet |
| Connector | IEC 60320-1 per power supply |
| Fuses | 6.3A, 250V ceramic time delay 5 x 20 mm -2 per power supply |
| EMX3-FR | |
|---|---|
| AC Mains Input | Auto-ranging, 100⇔240V AC, 50/60Hz |
| Max Operating Current | 4.6A (@ 100V / 60Hz) 1.85A (@ 240V / 50Hz) |
| Max Power Consumption | 450 watts (90 watts per slot) |
| Power Supply Configuration | 1 supply standard, optional redundant supply requires separate inlet |
| Connector | IEC 60320-1 per power supply |
| Fuses | 6.3A, 250V ceramic time delay 5 x 20 mm -2 per power supply |
Physical | |
|---|---|
| Dimensions | |
| EMX6-FR | 19"W x 10.5"H x 15.75"D (483mm W x 266mm H x 400mm D) |
| EMX3-FR | 19"W x 5.25"H x 15.75"D (483mm W x 133mm H x 400mm D) |
| Temperature | 0-40°C |
| Module Capacity | |
| EMX6-FR | 15 single-slot modules |
| EMX3-FR | 5 single-slot modules |
| Weight | |
| EMX6-FR | Full: 64lbs (29kg) Empty: 34.8lbs (16kg) |
| EMX3-FR | Full: 32lbs (14.5kg) Empty: 17.4lbs (8kg) |
Ordering Information
| EMR-64x64-3G | 64x64 SD/HD/3G/6G/12G Modular Router |
|---|
EMX Frames | |
|---|---|
| EMX6-FR | EMX 6RU Router Chassis with 15 slots |
| EMX3-FR | EMX 3RU Router Chassis with 5 slots |
| EMX-FC | EMX frame controller |
EMX Rear Plates | |
|---|---|
| EMR-RP4-64C | Rear plate with 64x64 HDBNC |
| EMR-RP4-64F | Rear plate with 64x SFP Transceiver ports |
| EMR-RP4-64F-R | Rear plate for the EMR-64x64-SDI router with 64 SFP+ ports with build in reclockers on the output paths, SFP SDI transceivers are sold separately. Uses 4 slots in an EMX frame. |
| EMR-RP4-32C-32F | Rear plate with 32x HDBNC plus 32x SFP Transceiver ports |
EMX Power Supplies | |
|---|---|
| +6PS | Redundant Power Supply for EMX6-FR |
| +3PS | Redundant Power Supply for EMX3-FR |
EMX Optional Features | |
|---|---|
| EMR-FK-12G | Support for 64x64 single-link 12G UHD signals |
| EMR-FK-CS6 | Enable up to 6x paths of clean switch and Evertz patented SoftSwitch technology for the EMR-32x32-3G and EMR-64x64-3G routers |
SFP Options | |
|---|---|
| Notes | • Contact the factory for additional SPF options |
| SFP3TR-HDBNC-12G | 12G/3G/HD/SD Reclocking, MSA SFP Transceiver, HD-BNC Connectors.. |
|---|---|
| SFP3TR-13-12G | SD/HD/3G/12G Reclocking SFP Transceiver using a wavelength 1310nm, Optical power: -5~0.5dBm, Sensitivity: -10dBm, handles pathological pattern, 2LC connectors. For use in Evertz 12G Router and Processing Products. |
| SFPTR-DIN-3G | SFP Coaxial Transceiver for Signals up to 3 Gig, Mini DIN Connectors |
| SFPTR-CXX-H | SFP Transceiver, CWDM wavelengths, high sensitivity receiver, supports rates to 3GB/s |
| SFPTR-13 | SFP Transceiver, 1310nm, standard sensitivity receiver, supports rates to 3GB/s |
| SFPTR-M-DIN | SFP coaxial transceiver for signals up to 3 Gig, MSA pinout, mini DIN connectors |