The 7812UDX-HD and 7812UDX-AES8-HD are Broadcast Quality Up/Down/Cross Converters that convert between common SD/SMPTE ST 259 and HD/SMPTE ST 292-1 video signals. -3G versions add support for common 3G/SMPTE ST 424 video signals. These modules support frame synchronization and external genlock inputs (card and frame reference) for video timing adjustments.
The 7812UDX series incorporates Mosquito Noise Reduction (MNR) and Block Artifact Reduction (BAR) in addition to motion adaptive spatial-temporal (3D) noise reduction. The 7812UDX series also incorporates new de-interlacing technologies for superior resolution and artifact reduction.
The 7812UDX series supports broadcast quality scaling and offers both standard and user defined ARC modes. AFD (SMPTE ST 2016) based steering of ARC modes and stamping AFD codes is fully supported. Transitions between AFD modes are frame accurate/glitch free. With the +F option, signals applied to PGM B IN can be keyed into image side panels. FILL inputs are frame synchronized so that pre-timing of FILL inputs is not required. With the +CF2G option, static or animated side panels can be stored locally and keyed into image side-panels.
Full broadcast quality color correction and detail enhancement processors are integrated in the 7812UDX series. RGB based color legalization is also supported. ITU Rec. 709 ⇔ 601 color space conversions are performed as needed.
The 7812UDX series supports 16 channels of embedded audio with audio delay automatically matching video delay. Additional audio delay is available. Full audio proc is supported including per channel audio gain, channel swapping and inversion controls. Surround sound to stereo (Lt/Rt or LoRo) down-mixing is supported.
On -AES8 variants of the 7812UDX series, 8x discrete AES inputs and outputs are supported in addition to advanced audio processes like stereo to 5.1 up-mixing (+UMX), Dolby® E/AC-AC3 Decoding (+DD), Dolby® E Encoding (+DEE), Dolby® AC3 Encoding (+AC3E) and IntelliGain Loudness Management (+IG). Any two Dolby® encode or decode functions may be integrated into a single card including dual decoders or dual encoders.
These modules transfer closed caption and time information from input to output performing all HD ⇔ SD data translations and time code re-calculations. SFP based fiber inputs and outputs can be supported with the -F variations.(SFP modules ordered as separate accessories)
* When installed in the 7700FR-C modules occupy 3 slots. Card Slot blocker must be installed for operation in the 7700FR-C
|7812UDX-HD||HD Up/Down/Cross Converter|
|7812UDX-AES8-HD||HD Up/Down/Cross Converter with AES I/O|
|7812UDX-3G||3G & HD Up/Down/Cross Converter|
|7812UDX-AES8-3G||3G & HD Up/Down/Cross Converter with AES I/O|
|Fiber I/O Enabled|
|7812UDX-HD-F||HD Up/Down/Cross Converter with Fiber IO|
|7812UDX-AES8-HD-F||HD Up/Down/Cross Converter with AES and Fiber I/O|
|7812UDX-3G-F||3G & HD Up/Down/Cross Converter with Fiber IO|
|7812UDX-AES8-3G-F||3G & HD Up/Down/Cross Converter with AES and Fiber I/O|
|Note||• Rear plate must be specified at time of order - eg: [model]+3RU|
|+F||Side Panel Fill|
|+CF2G||Embedded Compact Flash|
|+ICL||Soft Knee Color Legalizer|
|+BPRP||Bypass Relay Enabled Rear Panel|
|For -AES8 versions only|
|+UMX||Stereo to 5.1 Up-mix|
|+IG||IntelliGain Loudness Management (+IG)|
|+DD||Dolby® E/AC3 Decoder|
|+DEE||Dolby® E Encoder|
|+AC3E||Dolby® AC3 Encoder|
|+DD2||Dual Dolby® E/AC3 Decoders|
|+DEE2||Dual Dolby® E Encoders|
|+AC3E2||Second AC-3 Encoder|
|Rear Plate Suffix|
|+3RU||3RU rear plate for use with 7800FR or 7700FR-C Multiframes|
|7800FR||3RU Multiframe which holds 15 single slot modules|
|7700FR-C||3RU Multiframe which holds 15 single slot modules|
|SFP3T13-2||Dual optical 3G/HD/SD-SDI SFP Transmitter, 1310 nm|
|SFP3R-2||Dual optical 3G/HD/SD-SD SFP Receiver|
|7800FC||VistaLINK® Frame Controller|
|CP-2116E-H||Remote Control Panel|
|CP-2232E||Remote Control Panel|