570ITXE-HW-P60-NSH

With the transition to IP, many facilities operate in a hybrid environment. Ingested content entering the workflow needs to be processed and ready to output to a variety of platforms and formats... which traditionally necessitates separate video processors, gateways, encoders, decoders, transcoders, up/down/cross converters and IPTV encoders. Evertz' 570iTXE offers the flexibility to take anything in and send anything out by providing a single point of entry for all compressed and uncompressed signals, eliminating the need for bulky infrastructure. Therefore, the 570iTXE is the ideal solution for hybrid broadcast facilities and broadcasters looking to transition to IP.

The 570iTXE acts as the front edge of signal/content acquisition. It can create multiple transcoded versions ("tracks") of each signal which can be routed, recorded, edited and played out from downstream products.

The 570iTXE also provides incredible versatility. For example, if low latency is required, the downstream device can use the J2K (or SMPTE ST 2110/ASPEN) or AVCI-100 track if editing is required. Alternatively, if basic in-house monitoring or rough cut editing via an external device is needed, low bitrate H.264 can be used. This offers incredible flexibility for live production workflows.

Features

• Triple stage output encoder: H.264 (4:2:0/8-bit, 4:2:2/10-bit) and ASPEN/ SMPTE ST 2110/J2K
• Video standard: 525i/59.94, 625i/50, 720p/59.94, 720p/50, 1080i/59.94, 1080i/50, 1080p/59.94 Level A, 1080p/50 Level A
• Easy-to-use web browser interface and/or SNMP for configuration/control
• Decoder stage supports H.264, MPEG-2 and J2K
• Video and audio processing *
• Option to GOP-align lock 4:2:0/8-bit and 4:2:2/10-bit output

Specifications

• Support for MPEG-2/H.264 and J2K *

• AAC (stereo only) *
• AC3 (stereo/5.1) *
• Dolby® Plus *
• MPEG-2 *
• Dolby® E *
• PCM pass-through

• SMPTE ST 2110, ASPEN
• PTP locking supported for sync rates of 32Hz and above

• H.264 4:2:0 8-bit output: up to 15MB/s
• H.264 4:2:2 10-bit output: up to 80MB/s
• J2K 4:2:2 10-bit output: up to 250MB/s

• AAC *
• PCM
• Dolby® E *

• 2x 10GbE
• 2x 1GbE ***

• Video gain
• Y offset
• Saturation gain
• Hue
• Cb gain
• Cr gain
• Audio gain
• Audio inversion
• Audio mixing

• Up/down/cross conversion
• Aspect ratio conversion *

• Frame sync through genlock and master PCR

• DIN for video processing/encoding stage and ASI input
• IP for video and metadata in

• SNMP with Ethernet access provided by a local frame controller
• WebEasy
• LACP control ***

* Requires license
** Contact factory for other codec support
*** Based on application firmware, 1GbE ports can be used for LACP control or GbE data

Ordering Information