The Evertz 570FR High Density Frame is an ideal solution for high density processing applications. It offers easy installation and access to latest generation 570 modules. The 570FR is a 3RU frame designed to house 15x single-slot modules.
Special care was taken during the design process to ensure that the 570FR meets the demanding needs of today's advanced television studios and broadcast facilities. In addition, sufficient flexibility was factored into the design of the 570FR to satisfy the emerging demands of the future.
The 570FR is designed with a high density capacity to conserve equipment rack space. Care has been taken to ensure sufficient thermal relief for up to 750 watts of processing power per frame required to meet the increasing power demands of future high-speed processing cards.
Additionally the 570FR offers hot-swappable dual redundant power supplies that allow for power supply and fan replacement without compromising the integrity of critical signal paths and true remote monitoring of all modules and signals within the chassis via a VistaLINK® frame controller. This configuration provides the SNMP network communication interface from the VistaLINK® Network Management Software to the chassis over the Local or Wide Area Network.
Features
- 570FR houses up to 15x single-slot processing modules in 3RU
- Front monitoring for verifying module and power supply status
- Front extractable modules, power supplies and fans
- AC auto-ranging power supply operates from 100 – 240V AC at 50/60Hz
- Power supply and frame cooling fans are fully redundant and hot-swappable
- High-speed busing and control system provided for modular applications
- Slot 1 may be used for 570FC VistaLINK® Frame Controller for SNMP control and monitoring
- Compatible with all Evertz 7700/7800 series modules
- 750 watts power supplies and cooling to support 570 series modules
- Dual frame genlock for internal reference distribution
- Rear exhaust from main cooling fans
Specifications
| Power Supply Configuration | |
|---|---|
| Single PS | Standard with all frames |
| Dual/Redundant PS | Optional |
| Inlets | Separate inlets per PS |
| Status Indicators | (each power supply) PSU status LED Local Error/Failure LED |
| Temperature | 0-40°C |
| Electrical | |
|---|---|
| Voltage | Auto-ranging |
| 570FR | 100 – 240V AC, 50/60Hz |
| Connector | IEC 60320-1 per power supply |
| Fuses | 16A, 250V ceramic time delay 5x 20mm -1 per power supply |
| Maximum Operating Current | 8.6A (@ 100V/60Hz), 3.6A (@ 240V/50Hz) |
| Maximum Power Consumption/Maximum Module Load | |
| 570FR | 850W/750 watts |
| Compliance | |
|---|---|
| Safety | CSA Listed to CSA C22.2 No. 60065-03, UL 60065-03, IEC 60065-(2001-12) 7th edition; Complies with CE Low voltage Directive 2006/95/EC |
| EMC | Complies with FCC part 15, class A Complies with EU EMC directive 2004/108/EC |
| Physical | |
|---|---|
| Dimensions | 5.25" H x 19" W x 17.75" D (133mm H x 483mm W x 450mm D) |
| Module Capacity | 15 slots |
| Weight | 17.4lbs (7.9kg) empty, 32lbs (14.5kg) with two power supplies, all slots occupied |
| Genlock | |
|---|---|
| Number of Inputs | 2 |
| Termination | 75Ω |
Ordering Information
| 570FR | 3RU Compact High Density Distribution Frame, holds up to 15x single-slot modules with 750 watts power supply |
|---|
| Ordering Options | |
|---|---|
| 570FC | Frame controller |
| +57PS | Redundant power supply for 570FR |
