Interact with this product in a Layout Tool:
The 7700ACO2-SLKE-HD is the industry's leading smart automatic changeover (ACO) for high definition 1.5Gb/s or standard definition 270Mb/s serial digital video signals.
This device provides:
- Dual processing paths on a single module
- Smart HD/SD-SDI automatic protection switching of both paths
- Video and Audio Proc Amp Control
- Built in Trouble Slide per ACO
- H.264 encode of either all four inputs in a quad-split, or any one input, built off Evertz award winning StreamLINK™ engine
- Optional IntelliGain™ Audio Loudness Processing with Dynamic Audio Range Control
These modules have dual independent processing paths providing both high density and availability of any HD-SDI or SD-SDI video inputs signals (program and back-up). These modules provides a passive loop-thru of both primary and backup input video sources and provides dual safe program outputs.
The 7700ACO2-SLKE-HD incorporates Evertz essential audio and video monitoring which is used to drive the real time automatic switch logic processor. Common parameters include user configurable loss of signal, freeze, and black detect.
The 7700ACO2-SLKE-HD can optionally be ordered with Evertz patented IntelliGain™ Audio and Loudness Processor. The IntelliGain™ processor is designed to normalize perceived differences in audio loudness in real time for any HD/SD-SDI signal with embedded audio. This module will internally de-embed the audio signals, regulate the signal level based on a used defined target loudness level, then re-embed the corrected audio signals back into the video output.
VistaLINK® enables control and configuration capabilities via Simple Network Management Protocol (SNMP). This offers the flexibility to manage the module status monitoring and configuration from SNMP - enabled control systems such as Evertz VistaLINK® PRO locally or remotely.
The 7700ACO2-SLKE-HD occupies two card slots and can be housed in the 1RU 7801FR frame which holds up to four single or two dual slot modules, the 3RU 7800FR frame which has a 15 slot capacity, or the portable 3RU 350FR frame which has a 7 slot capacity. The 7800FC frame controller is required for configuration.
Features
Video Inputs and Outputs
- Auto sensing of HD and SD input formats
- Smart Automatic changeover based on user programmable switch logic
- Card edge menu control for configuration of operating modes and LEDs for reporting signal presence, router state, module status
- VistaLINK® capable for remote monitoring, control and configuration capabilities via SNMP; using VistaLINK® PRO, CP-2116E or CP-2232E Control Panels. VistaLINK® is available when modules are used with the 3RU 7800FR frame and a 7800FC VistaLINK® Frame Controller module in slot 1 of the frame
- Bypass relay protection on main program output
- Integrated SoftSwitch technology for clean video and "popless" embedded audio switching
StreamLINK H.264 Video Encoder
- Standard Definition H.264 of content for confidence monitoring
- Available as a quad-split of all input signals, or one cherry picked signal
- Audio is cherry picked as one pair from any input source
IntelliGain Audio and Loudness Processor
- Consistent audio loudness levels within a channel and/or program
- Gain control within a program interval to preserve audio dynamic range
- Artifact-free transitions between program and commercials
- Elimination of drastic volume changes during commercials and interstitials
- Ideal for aggregator applications and multi-channel playout facilities (DTH, Cable, IPTV...)
Specifications
Serial Video Input | |
---|---|
Standard | Auto-detects standard 1.485Gb/s ST 292-1 (1080i/59.94, 1080i/50, 720p/59.94, 720p/50) SMPTE ST 260-1, SMPTE ST 274-1, SMPTE ST 296-1, SMPTE ST 349-1 (HD or SD carrier) 270Mb/s SMPTE ST 259-1 (525i/59.94 or 625i/50) |
Connector | 2 BNC per IEC 61169-8 Annex A |
Input Equalization | Automatic 100m @ 1.5Gb/s with Belden 1694A or Equivalent cable |
Return Loss | > 20dB up to 270MHz, > 12dB up to 1.5GHz |
Reclocked Serial Video Output | |
---|---|
Standard | Same as input |
Number of Outputs | 2 Smart switched program outputs (Input 1 is bypass relay protected) Loop thru on Input A and Input B |
Connector | BNC per IEC 61169-8 Annex A |
Signal Level | 800mV nominal |
DC Offset | 0V ±0.5V |
Rise And Fall Time | 200ps nominal |
Overshoot | < 10% of amplitude |
Return Loss | > 20dB up to 270MHz, > 15dB at 1.5Gb/s |
Jitter | < 0.16UI (HD) |
Signal Encoding | |
---|---|
Video Encoding Engine | H.264/AVC (MPEG-4 Part 10) SD Base Profile @ Level 3 |
Audio Encoding Engine | MPEG 1 L2/AC-3 Pass Thru |
Traffic Shaping | Constant bit rate |
GOP Structure | Configurable GOP sizes |
Video Resolution | 525i/625i |
Recommended Bit Rate | ≥ 1Mb/s |
Frame Encoding | IP |
Frame Rate | Full frame rate |
Audio Channels | 1 Stereo Pair (L/R) |
Audio Output Bit Rate | Fixed 192Kb/s |
Delivery | UDP Unicast/Multicast |
Electrical | |
---|---|
Voltage | +12V DC |
Power | 20 watts |
EMI/RFI | Complies with FCC regulations for Class A devices Complies with EU EMC directive |
Physical | |
---|---|
Number of Slots | 2 |
Ordering Information
Notes | • Requires 7800FC for full module control |
---|
7700ACO2‑SLKE | Dual SD-SDI Smart Automatic Changeover |
---|---|
7700ACO2‑SLKE‑HD | Dual HD/SD-SDI Smart Automatic Changeover |
Ordering Options | |
---|---|
Notes | • Rear plate must be specified at time of order - eg: [model]+3RU |
+IG | Integrated IntelliGain™ Audio and Loudness Processor |
---|
Rear Plate Suffix | |
---|---|
+3RU | 3RU rear plate for use with 350FR, 7700FR-C, 7800FR or 7801FR Multiframes |
Enclosures | |
---|---|
350FR | Portable Multiframe which holds 7 single slot modules |
7700FR-C | 3RU Multiframe which holds 15 single slot modules |
7800FR | 3RU Multiframe which holds 15 single slot modules |
7801FR | 1RU Multiframe which holds up to 4 single slot or 2 dual slot modules |
Accessories | |
---|---|
7800FC | VistaLINK® Frame Controller |
CP-2116E-H | Remote Control Panel |
CP-2232E | Remote Control Panel |