See how this modular product fits in a frame:

The 670IPG-X19-25G-100G is Evertz' third generation low latency, ultra high-density gateway for IP encapsulation/de-encapsulation of SDI over 25GbE, as well as protocol conversion including SMPTE ST 2022-6 and SMPTE ST 2110.

With direct conversion of up to 16x input and 16x output SD/HD/3G signals to/from IP using SMPTE ST 2022-6 or SMPTE ST 2110 formats, 670IPG-X19-25G-100G series delivers unparalleled processing density. The 670IPG-X19-25G-100G series also provides high-density format conversion as the industry transitions to SMPTE ST 2110.

670IPG-X19-25G-100G also provides per-input AVM monitoring, time-stamped Ethernet outputs and audio/video synchronization.

The 670IPG-X19-25G-100G series modules incorporates patent pending multipath, multi-flow packet merge for bit error resilience in networks, to achieve 100% QoS.

The 670IPG-X19-25G-100G can be managed via integrated HTTP web interface, in-band via its 25GbE interface as well as SNMP management via frame controller.

Features

  • 16x input and 16x output SD/HD/3G SDI coaxial ports
  • Up to 4x QSFP28 ports in hot main/hot backup configuration with flexible channel mapping for bandwidth optimization
  • Loopback of any signal to IP/SDI output, to allow central NOC monitoring and destination monitoring
  • AES67 audio packet time: 125µs or 1ms
  • Pop suppression on output audio
  • Video at native resolution
  • 4x groups of audio (4x mono channels per multicast address)
  • Full VANC carriage
  • Frame buffer synchronized to Genlock, Master PCR or SMPTE ST 2059-2 PTP for output phase alignment
  • Accepts SMPTE ST 2059-2 or Master PCR timing references over 25GbE to allow time-stamping of all content over Ethernet
  • Modules have on-board AVM on all baseband signals
  • Modules support control in-band from 25GbE interface or via frame controller using SNMP with VistaLINK® PRO or MAGNUM Unified Control

Broad Support of Standards

1080p/59.94, 1080p/50, 1080p/29.97, 1080p/25, 1080p/23.98, 1080p/24, 1080i/59.94, 1080i/50, 720p/59.94, 720p/50, 525i/59.94, 625i/50.

For 12G standards, contact factory.

Standard Compliances

  • SMPTE ST 2022-6: video, audio and VANC
  • SMPTE ST 2110: video (ST 2110-20), audio (ST 2110-30), VANC (ST 2110-40)

Specifications

Serial Digital Video

Standards SMPTE ST 424M (3GB/s), ST 292M (1.5GB/s), ST 259M (270MB/s)

Serial Video Input

Number of Inputs 16
Connector DIN 1.0/2.3
Input Equalization Automatic to 100m @ 3GB/s, 150m @ 1.5GB/s, and 350m @ 270MB/s
Return Loss > 12dB up to 0.5GHz, > 10dB up to 3GHz

Serial Video Output

Number of Inputs 16
Rise And Fall Time Per SMPTE spec

Ethernet Interface

  • 4x QSFP28, 8x SFP28

Audio Encapsulation

  • SMPTE ST 2022-6
  • SMPTE ST 2110-30

Metadata Encapsulation

  • SMPTE ST 2022-6
  • SMPTE ST 2110-40

Video Encapsulation

  • SMPTE ST 2022-6
  • SMPTE ST 2110-20

Data Format

  • Ethernet/IP/UDP

Electrical

Power 120 watts
Voltage 12V DC

Physical

Number of Slots 2

Switching Reference

Reference Inputs 2x BNC on ev6-FR, analog 525/625, PTP via 25GbE interface

Compliance

Supported Media Standards AMWA NMOS IS-04 v1.3, IS-05 v1.1 and BCP-002-01 v1.0
EMI/RFI Complies with EN 55035:2017/A11:2020

Ordering Information

670IPG‑X19‑25G‑100G 3rd generation enhanced logic capacity Evertz EV6-FR hardware module acting as an IP media gateway. 16 x 16 3G/HD/SD-SDI I/O and up to 4 x 25GE interfaces using 1 QSFP28 interfaces (optics sold separately)
Rear Plate Suffix
+6RU 6RU rear plate for use in 6RU slots

Enclosures

ev6-FR 6RU evBLADE multiframe which holds 15 single slot modules

License Options

670IPG-FK-SDI-2110 Support for 16x16 3G SDI (3G SDI ⇒ SMPTE 2110, SMPTE 2110 ⇒ 3G SDI Translations

SFP Interface Options

QSFP25G-A 100G QSFP, 4 channel 1310nm over MTP8 interconnect
QSFP-10G-TR13-G 25G Optical Transceiver, 1310nm, SM, 10km, LC Connectors
SFP25G-TR13 25G Optical Transceiver, 1310nm, SM, 10km, LC Connectors

Contact factory for more options.