Skip to Main Content


Multi-GNSS Receiver for use with RF GNSS Antennae

The MSC-RF-ADAPT is a multi-global navigation satellite system receiver capable of receiving GPS, GLONASS and other GNSS constellation signals using a Trimble Bullet 360 or other commercially-available GNSS antenna. The MSC-RF-ADAPT connects to Evertz' master clock products such as 5700MSC-IP and 5601MSC with a RS-422 serial link, and to the GNSS antenna using 50Ω coaxial cable. For added flexibility, several MSC-RF-ADAPT multi-GNSS receivers may be connected to an RF distribution amplifier (such as the Evertz 7703DA4/8/16/32) to share one antenna. RF connections may be extended with in-line amplifiers (such as the Evertz 7703PA and 7703PA-2) and fiber extenders (such as the Evertz 2408LT and 7707LRA).


  • High sensitivity for operation in low-signal environments
  • Multi-GNSS capability
  • Simultaneous GPS/GLONASS tracking
  • LED power light to confirm operation
  • Plug-and-play interoperability with Evertz' 5700MSC-IP and 5601MSC Master Clocks
  • Operates with RF distribution amplifiers, in-line amplifiers and fiber extenders

MSC-RF-ADAPT Configuration Example Diagram


Power DC LNA power supply 5.5V @ 50mA (maximum)
Supported GNSS Constellations GPS, GLONASS, Galileo, Beidou
Positioning System SPS, Timing
1 PPS Timing Accuracy 15ns (1Σ)
Update Rate 1Hz
Dimensions 3.75" x 1" x 1.56"
(95.3mm x 25.4mm x 39.6mm)
Typical Minimum Acquisition Sensitivity -148dBm cold start
Typical Minimum Tracking Sensitivity -160dBm
Time To First Fix < 46s (50%), < 50s (90%) cold start
Typical Time To Re-acquisition < 2s (90%)

Ordering Information

*Please contact factory for ordering information