********************************************************* * This firmware is for the following products: * * -------------------------------------------- * * 7832SVP-444-3G * ********************************************************* NOTE: 3G Support requires Rev. D hardware or the application of ECO-ID 16943. version 14.01_7 (April 27, 2015) --------------------------------------- Feature Additions: - Timecode and ANC Data now embedded on all outputs. - Up to 60 frames of extra video delay per eye. - ANC Forward now supports up to 64 ANC Packets per frame. - H-Split Offset now supports the full image width. Resolved the following Bugs: - Corruption of ANC data when more than 31 packets exist on an input frame. - Audio crackles. - Timecode output ANC packet error. - STM delay reporting errors. - Audio missing on the LE422 and RE422 outputs - Payload ID output error for 720p. version 11.12_52 (November 26, 2012) --------------------------------------- Video: - added a wider set of supported video standards. - "Auto" Video Standard detection. - Independent input and output Interface selection to allow for conversion from ST292-2 (two HD rate cables) to ST425-2 (one 3G rate cable) - Support for Frame Compatible input formats. - Input Source selection to allow -B BNCs to be used as an alternate input. - Output H&V Phase controls for program and 3D Formatter outputs. - Automatic conversion between Progressive and Segmented Frame video formats. Mixer Modes: - added anaglyph output. - added Wiggle mix mode which toggles the output image between the Left Eye and the Right Eye at a specified rate. Other: - Horizontal Image Translation (HIT) that can be applied to the Mixer and 3D Formatter outputs independent of the Program outputs. - Added output muxes on "Left OUT-B" and "Right OUT-B" to create Aux4 and Aux5. - 3D Formatter selectable as the OSD background video. - Stereo Temporal Matching (+STM) option for detection and correction of temporal mismatches between the Left and Right eyes. - ANC Data now supported on the 3D formatter output - Added support for sub-presets. - Improvements to GPI interface. - Added GPOs. - Improvements to Monitoring - Support for direct SNMP control through the 7832SVP-3G's Ethernet port (mini agent JAR file required). - support for SNMP Traps