************************************************
* This firmware is for the following products: *
* -------------------------------------------- *
* 78(7)12UDX/HDC/UC/XC/ARC family products     *
************************************************

version 23.07 build 1  (December 11, 2012)
------------------------------------------------
- corrected Dolby Encoder delay compensation on Dolby Encoder audio outputs.

version 23.06 build 2  (August 24, 2012)
------------------------------------------------
- Corrected an issue when RP186 is inserted on field 2 for video 625i/50,.


version 23.05 build 14  (May 22, 2012)
------------------------------------------------
- Fixes intermittent glitch in VBI when VANC Bypass is enabled.
- Auto-recall presets now backwards compatible with 8.xx version firmware.
- Properly clips audio input correction + audio proc gain at minimum and maximum gain values.
- Resolves audio lip sync issue when operating with very small video delay (< 3ms).

Version 23.03 build 6  (January 11, 2012)
------------------------------------------------
- Corrected support for ANC Type 1 packets in Dolby metadata processing
- Inproved WSS waveform timing
- Increased preset robustness to random power loss occurrences
- Updated IntelliGain version to 2.0 [+IG option only]
- FS Only mode now forces output video standard to match input video standard

Feature Additions (with respect to last Global release - 8.05 build 3):
- Blur
- Fiber I/O [-F option]
- Dolby E/AC3 Encoding/Decoding
- Dolby metadata processing (Dialnorm adjustment, External metadata I/O)
- Dolby switch suppression
- Auto reference fail-over fault & event traps
- Sub-presets
- User controlled additional video frame delay
- VI
- WSS Copyright bit authoring (CGMS)
- 24Hz to 60Hz video conversions
- External LTC I/O
- ANC pass-through
- Breakout audio mode
- AVM audio silence detection (preset triggers & trap reporting)
- Thumbnails
- OP42/OP47 processing [+OP4247 option]
- Freeze frame mode

Version 8.05 build 3  (February 28, 2011)
------------------------------------------------
- corrected IP address from being erased
- corrected video tear issue when going from 525 to 720p


Version 8.03 build 20  (February 2, 2010)
------------------------------------------------
Logo size (field height multiplied by width) must be a multiple of 16.
This firmware will only work with 7700FC firmware release fc_rel-3-01-b1 or newer. If customer has older FC firmware, they will have to upgrade their 7700FC.

Version 8.00 build 1849 (August 20, 2009)
------------------------------------------------
Added new features(options):
- "Audio Input Correction" control
- "VANC Bypass" control
- "UK WSS" bypass and "UK VI" bypass controls
- "IP/Mask/Gateway addresses setting tap" in the VistaLink for both +CF2G and non-CF2G options
- "IntelliGain" control
- Additional products support of 7812XC, 7812XC-3G, and 7812ARC

Improved and/or corrected some issues with:
- Handling Input video standard
- V/H phase offset
- Video minimum delay
- Audio delay
- Dolby E(DE) and Dolby Digital(AC3)
- Logo with SD video standard
- 3G dual link(372M dual link) channel swap
- Some minor cosmetic issues with the VLPro(Vistalink) control 
 

Version 6.05 build 10 (December 10, 2008)
----------------------------------------------------
- added support of 15MB/s SanDisk compact Flash card
- remove traps that are not supported in the MIB


Version 6.04 build 3 (11 NOVEMBER, 2008)
--------------------------------------------
- Support for 7812xxx products


Note1:

The firmware will only valid with 7700FC firmware release fc_rel-3-01-b1 or newer. If customer has older 7700FC firmware, please refer to the note 2 below.

Note 2:

For firmware versions <4.00, a special "upgrade" binary must be used to upgrade to this firmware if the VLPro(Vistalink) is used.
The Upgrade is a two-step process:
- Use VLPro(Vistalink) firmware upgrade to upload the "upgrade" binary
- Use VLPro(Vistalink) firmware upgrade to upload this firmware