**********************************************************************
* This firmware is for the following products:                       *
* --------------------------------------------                       *
* X-HD9512, X-HD9512-RCP, X-9504-AES-X                               *
* X-9504, X-9504-RCP, X-9504-AES-C, X-9504-AES-C-RCP,                *
* X-HD9504, X-HD9504-RCP, X-HD9504-AES-C, X-HD9504-AES-C-RCP         *
* X-9504ATSC, X-9504ATSC-RCP, X-9504ATSC-AES-C, X-9504ATSC-AES-C-RCP *
**********************************************************************

Version 1.42 - (Jun  08,2004)
---------------------------------
- Corrected rapid transistion GPI bug

Version 1.41 - (Dec 12, 2002)
---------------------------------
- Corrected another GPI bug

Version 1.40 - (Dec 05, 2002)
---------------------------------
- Corrected a GPI 4 lockout bug

Version 1.39 - (Oct 28, 2002)
---------------------------------
- Swapped the leds to match the silkscreen
- Fixed the power cycle settings bug.  

Version 1.38 - (March 20, 2002)
----------------------------------
- Added router labelling utility

Version 1.37 - (November 15, 2001)
----------------------------------
- Corrected 7bit serial format error detection 
- Support for the GVG TENXL SMPTE

Version 1.35 - (July 4, 2001)
----------------------------------
- Corrected GPI bug
- Support for the 9000XFP version front panel

Version 1.33 - (May 29, 2001)
----------------------------------
- improved switch timing on 12 x 1 routers

Version 1.31 - (January 29, 2001)
----------------------------------
- added support to allow Genlocking of the software using the 720p menu setting

Version 1.30 - (January 22, 2001)
----------------------------------
- added menu item to view software revisions from the front panel
- made previously unused GPO3 reflect the input status of GPI1

Version 1.29 - (November 21, 2000)
----------------------------------
- fixed master/slave serial interface to report slave status correctly
  and also to slave the audio router A and B on the slave unit if
  the slave unit is being controlled remotely.
- cleaned up some mode transition display problems
		   
Version 1.23 - (November 14, 2000)
----------------------------------
- panel lock bug - wouldn't light up if status pressed	MB
- brightness bug - wouldn't refresh brightness if communication to 
		   fp lost				MB
Version 1.22 - (November 1, 2000)
---------------------------------
- Novramed the Serial Address parameter to ensure the External Serial
  control starts up on power up
- Panel Lockout Multipress display bug fixed

Version 1.21 - (August 3, 2000)
-------------------------------
- added GPI MODE menu item to select between a "return to Input 1"
  mode and a "stay at last GPI selcetion" mode
- changed the VIDEO REFERENCE text to match our standard naming 
  conventions

Version 1.2 - (August 31, 1999)
-------------------------------
- corrects the AES Bus B label recall problem

Version 1.11 - (July 26, 1999)
------------------------------
- added gvg10xl ascii protocol
- added gvg10xl smpte protocol
- added master and slave mode
- cross points set at base 0 (0 through 11 instead of 1 through 12)

Version 1.10 - (June 16, 1999)
------------------------------
- first production release