********************************************************* * This firmware is for the following products: * * -------------------------------------------- * * 9625DSK-LGA * ********************************************************* ***NOTE**** The GPO option is only included on units purchased or returned after after October 1st 2005 *********** version 2.01 build 760 (June 16, 2011) ----------------------------------------- - Corrected animation looping when configured with a hold segment version 2.01 build 758 (March 8, 2011) ----------------------------------------- - Added "EA Bypass" menu item under General menu for embedded audio bypass enable/disable - Corrected the video source LEDs on the front panel to show the source selections Version 2.01 build 750 (October 15, 2010) ----------------------------------------- - Corrected audio phase shift after program interruption - Added support for embedded audio bypass - Added an option to have temperature logos display the last valid reading after METAR or probe reading is not available - Corrected the decoding METAR temperature data file - Improved CPU memory by reducing the internal logo data structure size to 1024 - Increased the font memory pool size - Improved the behavior of automation triggered voiceover in line with that triggered through control panel or GPI. Version 2.01 build 700 (March 15, 2006) ----------------------------------------- - added support for audio clip looping - added support for vertical crawl - corrected issue with EAS and crawl logo out of bound memory allocation - corrected issue with non-supported transition types set by automation or GPI scripts - correction made to DCP for the second turn dial Version 2.01 build 690 (January 03, 2006) ----------------------------------------- - Added horizontal and vertical reference timing adjustment support - Added transition in/out rate control for voiceover - Added support for mono audio clip - Corrected issue when removing and re-inserting flash card caused reboot - Corrected voiceover distortion using PAL - Corrected Logo flash in PAL Version 2.01 build 658 (March 9, 2005) -------------------------------------- - added support for audio from HTML page - added support for GPI scripting - added support for wave file playout Version 1.01 build 418 (August 03, 2004) ---------------------------------------- - added Vetical offset timing (found in "select reference" submenu) Version 1.01 build 412 (January 19, 2004) ----------------------------------------- - added voiceover on top of audio clip - fix for EAS ramp issue - fix for EAS BG/FG edit menu issue Version 1.01 build 409 (January 9, 2004) ---------------------------------------- - enabled the crawl option - fix for CF card removal issue - fix for EA3_1 NonPCM issue - audio stereo channel pair swapping: new sub-menu items added to Audio menu for specifying the channel pair(s) to be swapped - voiceover input: a new item added to Audio menu for changing the voiceover input - voiceover input: a new item added to GPI setup menu for specifying the voiceover input, which will be used if Duck In is specified in action Version 1.01 build 400 (December 2, 2003) ----------------------------------------- - this firmware is supported with manual revision .02 Nov 03 or greater - fix for audio issues - fix for M2100/Quartz automation issue - the following are now stored in the preset 1)Audio Mode 2)Type 3)NonPCM States All 4)L21 Prot 5)B Blanking   6)The NonPCM value is now stored through power down Version 1.01 build 394 (September 23, 2003) ------------------------------------------- - fix for output audio distortion issue - fix for wipe transitions Version 1.01 build 374 (September 12, 2003) ------------------------------------------- - addded support for audio mode 3+1 and 4+0 - added support for audio type Embedded or Discrete - added voice over into embedded audio - added com port option for XY protocol - added com port option for M2100 (Quartz) - added custom EAS foreground and background color settings - added TTF for EAS crawl - fix for analog clock logo - Time and Temp logos gain adjustment does nothing at this time - Time and Temp no fade in at this time - Time and Temp no hold time at this time - Time and Temp no fade out at this time Version 1.01 build 163 (June 25, 2003) -------------------------------------- - added Fade All Out to actions for GPIs - added Voice Over, Logo Status, DSK Status, Prog Black, Prog B and Prog A to actions for GPOs - added M2100 and Quartz automation control support - fix for -6dB audio on all audio outputs Version 1.01 build 107 (May 15, 2003) ------------------------------------- - added support for reference select - added support for clock offsets - supports both revision 1 and revision A modules Version 1.0 build 392 (May 07, 2003) ------------------------------------ - first official release **NOTE** This version of firmware is for revision 1 modules only