********************************************************* * This firmware is for the following products: * * -------------------------------------------- * * 7765AVM-4-VGA (625) * ********************************************************* Version 2.04 build 7 - (January 5, 2005) ---------------------------------------- - added 625 CC line select to menu for user-configurable presence detection - added aspect ratio selection menu and GPI trigger enable for this item (don't available in expanded view mode) Version 2.03 build 3 - (May 27, 2003) ------------------------------------- - added support for fault ANDing, this means that fault condition x becomes active only if all of its enabled fault triggers are active Version 2.02 build 4 - (February 27, 2003) ------------------------------------------ - added support for GPI controlled fault enable. - fix for card possible interuption in service when 7700FC power cycles - added support for audio missing duration - the "audio missing" fault trigger is enabled after the audio has gone missing for this duration. - increased the range of the video invalid duration from 0..30 to 0..900 frames - added support for the Image Video UMD protocol - if a quadrant fault is disabled by the user, it has no effect on the quadrant expanded view control or on the GPOs. - fix for audio sample delay issue in embedded audio Video B, channels 1/2 - fix for audio channels 3/4 blipping when only audio content on channels 1/2 - fix for the "missing traps" issue - on power-up, all traps are transmitted to initialize the SNMP manager and the internal trap buffers - remove the non-linear look-up function that was used to draw bar graphs with BBC PPM ballistics. The scaling is linear dB as follows: Bar scale dBu 7 12 6 8 5 4 4 0 3 -4 2 -8 1 -12 Corrections to menu display strings: - "Black duration" is now called "Black video duration" - "Video invalid" is now called "Video error" Version 2.1 build 1 - (August 29, 2002) ------------------------------------ - first release