*********************************************************
* This firmware is for the following products:          *
* --------------------------------------------          *
* 7736CDM, 7736CDM-A4,  7736CDM-AES                     *
*********************************************************

version 1.5 buid 6 (October 3 ,2008)
--------------------------------------- 
-improved genlock sensitivity, 
-improved downstream video stability

version 1.5 buid 5 (February 20,2007)
--------------------------------------- 
- added support for PAL-M
- Increased robustness with noisy video for TBC=off


** Note: This version is a single release for the 7736CDM, 7736CDM-A4, 
         and 7736CDM-AES. see below for the separate histories to the 
         previous versions of firmware prior to August 23, 2005.

Version 1.4 build 208 (May 25, 2006)
--------------------------------------- 
- correction to audio gain controls for 7736CDM-AES

Version 1.4 build 158 (March 10, 2006)
--------------------------------------- 
- correction to BBC Level bars, now are linear
- added Card MIB support for VLPRO
- turned off pedestal on line 10-21 on monitoring output

Version 1.4 build 127 (August 23, 2005)
--------------------------------------- 
- 7736CDM and 7736CDM-A4 now also have the SDI proc menus
- corrected issue where audio 1/2 too loud trap was sent every time a trap, 
  which was enabled in a fault condition, was sent.
- this code makes sure the flash blocks are unlocked after the fpga resets 
  the Faroudja chip. This corrects the problem where the presets wont get 
  saved resulting in factory preset being loaded every time board powers up.





** old history file for the previous firmware versions of the 7736CDM-XX


*********************************************************
* This firmware is for the following products:          *
* --------------------------------------------          *
* 7736CDM, 7736CDM-A4	                                *
*********************************************************

Version 1.3 build 28 (April 30, 2005)
-------------------------------------
- added thumbnails
- corrected some menu descriptions

Version 1.0 build 82 (July 20, 2004)
------------------------------------
- added support for VistaLink

Version 1.0 build 78 (June 29, 2004)
------------------------------------
- fix for intermittent locking issue on input video in non-TBC mode

Version 1.0 build 77 (June 24, 2004)
------------------------------------
- fix for audio buffer locking issue

Version 1.0 build 76 (June 22, 2004)
------------------------------------
- fix for V locked low frequency SDI jitter issue

Version 1.0 build 75 (June 22, 2004)
------------------------------------
- fix for Closed Captionning issue
- fix for PAL-B support

Version 1.0 build 58 (June 17, 2004)
------------------------------------
- first release 





** old history file for the previous firmware versions of the 7736CDM-AES

*********************************************************
* This firmware is for the following products:          *
* --------------------------------------------          *
* 7736CDM-AES                                           *
*********************************************************

Version 1.4 build 117 (June 27, 2005)
-------------------------------------
- corrected audio error duration, it was missing from the fault definition menus. 
- corrected firmware, it was not using audio error duration when generating 
  missing audio faults.

Version 1.4 build 98 (June 06, 2005)
------------------------------------
- added new faults for White level warning and Black Level warning
- added control for enabling and disabling the status window from VLPRO. 
  Previous control did not have 
   values for FAULT 1, FAULT 2, FAULT 1 or FAULT 2.
- corrected menu issue, for Fault Definition 1 & 2, current menu options were 
  not displayed. All Audio fault enables were missing.

Version 1.4 build 27 (May 20, 2005)
-----------------------------------
- Added Digital Audio (AES) level controls.
- corrected menu item for Error Quantity under fault conditions, so that when 
  doing a set from VLPRO it is updated

Version 1.4 build 9 (May 13, 2005)
----------------------------------
- first release 
New Features
-SDI video proc functions (under Video/SID -> Digital Video Processing)
-Average Picture level measurement (an item on the status screen)
-Picture too black or picture too white faults (there are controls for 
 these under Fault Definition menu)